Hager WT1191, Plain Bearing, Brass or Stainless, Standard Weight, 5 Knuckle, Full Mortised, Wide Throw Hinge, All Sizes

This item has been discontinued.

For an alternative, please see our Hager #WTBB1191 Ball Bearing Wide Throw Brass Hinge.

See tabs below for additional information
    • SKU
      HGWT1191-3.5x5-US4
    Call for price!
    845-388-1300

    Hager WT1191 Full Mortised Architectural, 5 Knuckle, Plain Bearing Hinge with Wide Throw. Standard weight for use with medium weight door or doors requiring low frequency service. Brass or stainless steel hinge with stainless steel pin.

    Available Size: 

    Hinge SizeGauge of MetalHole CountScrew Size
      Inches  mm      Machine  Wood
      3-1/2" x 5"  89 x 127  0.119  6  1/2 x 10-24  1 x 9
      3-1/2" x 6"  89 x 152  0.119  6  1/2 x 10-24  1 x 9
      4" x 5"  102 x 127  0.129  8  1/2 x 12-24  1-1/4 x 12
      4" x 6"  102 x 152  0.129  8  1/2 x 12-24  1-1/4 x 12
      4" x 7"  102 x 178  0.129  8  1/2 x 12-24  1-1/4 x 12
      4-1/2" x 5"  114 x 127  0.134  8  1/2 x 12-24  1-1/4 x 12
      4-1/2" x 6"  114 x 152  0.134  8  1/2 x 12-24  1-1/4 x 12
      5" x 6"  127 x 152  0.145  8  1/2 x 12-24  1-1/4 x 12

    Available Finishes: See options above, See Hager Hinges Color Chart for a detailed list of Hager finishes.

    Custom Finishes: Available through our office. For details and pricing please contact us or call us at 845-388-1300.

    Hinge is provided with a non-rising removable pin. The pin does not rise out of the barrel, yet it is removable, which allows the pin to be taken out for the dismantling of the door without unscrewing the entire hinge. Contains button tip and plug.

    Additional Options- Can be purchased through our office

    • Non-removable pin (NRP). Pins which have a groove milled into them. A set screw is inserted through the middle knuckle into the groove. This way the pin, hinge and door cannot be removed - Select from options above. 
    • Concealed Electric Modifications available: EMN, ETW and ETM available. For more information see Options Tab to the right. Electric Modifications can be purchased through our office. For details and pricing please contact us or call us at 845-388-1300.

    Priced per piece.

    Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See Product Specs Tab for exact measurements.

    This product has a lifetime guarantee against defects in workmanship and materials.
     Click here to view our Full Warranty Policy.

    To view this product with a standard throw see our Hager 1191 5 Knuckle Plain Bearing, Standard Weight Architectural Hinge.

      • SKU
        HGWT1191-3.5x5-US4
    • QuickShip
      No
    • Manufacturer
      Hager Companies
    • MPN
      WT1191
    • Product Design
      • Hinge Category
        Full Mortised Hinge
      • Base Material
        Brass, Stainless Steel
      • Usage Level
        Standard Duty
      • Throw
        Wide Throw
      • Bearing Type
        Plain Bearing
      • Knuckles
        5 Knuckle Hinge
      • Pin Type
        Standard Hinge Pin
      • Hinge Tip Type
        Button Tip
      • Hinge Corner
        Square Corner
      • Hole Pattern
        Commercial "C" Pattern
      • Number of Holes
        See Dimensions Chart
    • Dimensions
      • Hinge Size
        3-1/2" x 5", 3-1/2" x 6", 4" x 5", 4" x 6", 4" x 7", 4-1/2" x 5", 4-1/2" x 6"
      • Hinge Thickness
        See Dimensions Chart
    • Installation
      • Door Type
        Wooden Door, Metal Door
      • Installation Screws
        Installation Screws Provided Accordingly:
        4-1/2" Hinge: All metal screws and half wood screws
        3-1/2" Hinge: All wood screws and half metal screws
        4" Hinge: All wood screws and half metal screws
        5" Hinge: All metal screws and half wood screws
        Additional screw packs can be provided if listed in order comments before completing purchase.
    • Additional Options - Purchase Through Our Office
      • Electric Modifications
        Yes
    • Finishes
      • Finish
        Polished Brass (US3), Satin Brass (US4), Satin Bronze (US10), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Satin Chrome (US26D), Polished Stainless Steel (US32), Satin Stainless Steel (US32D)
    • Compliance Details
      • Compliance Details
        BHMA Certified
      • ANSI Designation
        A2112, A5112, A156.18
      • Warranty
        Lifetime Limited Warranty

    Click to Print 3-1/2" Hinge Template

    Click to Print 4" Hinge Template

    Click to Print 4-1/2" Hinge Template

    Click to Print 5" Hinge Template

     

    3-1/2" Hinge Template. Select links above for additional templates.

     

    Electric Modifications

    EMN-Electric Monitor Type:

    Electric Monitor hinge has a miniature snap action incorporated into the frame leaf. It utilizes a switch to send a signal when the door is opened. This hinge is for electric monitor only.

    • 28 gauge wire
    • Hinge pins are not removable
    • Monitoring capability only 
    • Concealed subminiature snap action, SPDT switch
    • Adjustment feature for a wide range of switch sensitivity
    • Preset switching circuit
    • For open loop secure, closed loop secure or single pole double throw (SPDT)

    Switch Maximum Electrical rating: 30 VDC @ .500 amps                                                            

    ETW-Electric Thru-Wire Type:

    Concealed electric thru-wire hinges are a means to transfer electrical power from the power source, (through the use of 4 continuous electric conductors) through the frame and into the door and finally to the electrified door hardware, such as power lock sets, exit devices and other door monitoring devices. This hinge is for electric thru-wire only.

    • 28 guage wire
    • Hinge pins are not removable
    • Low voltage electric current transfer capability only
    • 4, 6, 8, 10, 12 continuous electrical conductors

    Electrical rating:

    Wire Maximum Electrical Rating                  
    Volts    Amperes         

    48

    VDC

    3.5 amps     CONTINUOUS

    16.0 amps   PULSE

     
     

    ETM-Electric Tru-Wire and Monitor Type:

    These hinges can monitor door position while at the same time transfering power to electrified door hardware such as, power lock sets, exit devices and other door monitoring devices. It does this by combining the 4 continuous electric conductors and the miniature snap action switch to provide continuous circuit and monitoring capabilities.

    • 28 gauge wire
    • Hinge pins are not removable
    • Both continuous electric conductors and monitoring capability
    • Concealed monitor switch and 4, 6, 8 or 10 continuous conductors
    • Adjustment feature for a wide range of switch sensitivity
    • For open loop secure, closed loop secure or single pole double throw (SPDT)

    Electrical rating:

    Contact Maximum Electrical Rating             
    Volts       Amperes        

    48

    VDC

    3.5 amps     CONTINUOUS

    16.0 amps   PULSE

    Switch Maximum Electrical Rating  
    30 VDC @ .500 amps
     

    Important Points to know about Electric Hinges:

    • All of the Hager Companies electric hinges have been tested through UL in order that our products can be used on fire rated or labeled openings.

    • The electric hinge should be the center hinge and used only for low voltage power transfer (48 volts and under) because of safety.

    • The use of a mortar or jamb box is recommended together with electrically modifies hinges in order to protect the wire termination on the inside of the frame. If the box is not used and wires are damaged, warranty of the product will be void.

    • Electric hinges have a 1 year guarantee against defects in workmanship and materials.

    • Electric Modifications can be purchased through our office. Please contact us or call us at 845-352-3200.

     

     


    SHIPPING / PROCESSING TIME:


    This product ships directly from the manufacturer. 
    Stocked Items: 2 - 5 Days
    Out of Stock Items: 4 - 10 weeks

    CALL TO CONFIRM STOCK
    • Domestic Shipping Fees- (Hawaii and Alaska not Included):
      • FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders). 
      • There will be a flat $19.99 shipping and handling fee on orders under $300.00.
      • Freight Items: Orders containing items sized 90" - 96" have an oversize surcharge of $199.00.
      • Oversize Freight Items: Orders containing items sized 97" and above have an oversize surcharge of $250.00.
      • Orders totals above $2,000.00 will ship free, regardless of size.
    • Alaska and Hawaii, Canada, and International Shipping:
    • Returns:
      • These items are non-returnable.
      • We are committed to your satisfaction. As a courtesy, we may, at our discretion accept returns with a minimum 30% restock fee.
      • CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within ten (10) days of receipt of goods.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
      • Return shipping is customer's responsibility. A return address will be provided with RMA#.
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.