Pemko #R1F Modular Ramp, Aluminum 1" Height, 12.375" Length
Modular Ramps are designed to transition offset floor conditions and ease movement for those with limited mobility. This ramp ensures smooth transition for an offset of 1". Available in high quality Aluminum or Aluminum PemKote™ Non-Slip surface and optional, though recommended, Miter Returns (see below).
PRICED PER FOOT
Modular Ramps are designed to transition offset floor conditions and ease movement for those with limited mobility. It is made of two components, which interlock to form one sturdy ramp. No welding is required for installation. This ramp is wheelchair compatible and meets the slope requirements for Americans with Disabilities Act (ADA). The grooved surface allows for a stronger grip, to prevent slipping.
Available in standard Aluminum Mill Finish or with Aluminum PemKote™ Non-Slip Surface. PemKote™ is highly recommended for all thresholds, particularly for ones placed in exterior conditions where moisture may be present.
Miter Return Ends Pieces: The use of Miter Returns are recommended to seal the sides of the ramps. However, the miter returns do not meet the ADA slope requirements and are not ADA compliant. If miter returns are not used, it is recommended to fill and feather the threshold ends with grout - do not leave the ramp ends open.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
Standard Aluminum product is guaranteed for 5 years against defects in material and workmanship.
PemKote™ finish carries a 10 year guarantee.
Click here view a Ramp for Threshold for 1.25" Floor Offset.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPNR1F, R1FMR
- Dimensions
-
Offset Height1" Height
-
Width12.375" Width
-
LengthCustom Cut to Size
-
- Ramp Design
-
MaterialAluminum
-
Ramp ComponentRamp End
-
Ramp TypeFlush Application
-
InstallationSupplied with #10 Stainless Steel wood screws. Expansion shields can be purchased by contacting our office. This ramp has 2 screws per foot. (Ex: a 36" width ramp will have 3 rows of 2 screws, with a total of 6 screws).
-
DrillingDrill holes are provided
-
- Additional Options
-
Miter ReturnNone Required, Aluminum Miter Return (#R1FMRA), PemKote™ Miter Return (#R1FMRAK)
-
- Finishes
-
FinishMill Finish Aluminum (US27), Aluminum PemKote™
-
- Compliance Details
-
Compliance DetailsFire Rated, BHMA Certified, ADA Compliant
-
Warranty5 Year Limited Warranty, PemKote™ Finish Carries a 10 Year Guarantee
-