Rixson 27-180 COMPLETE PACKAGE - 3/4" Offset Hung 180° Opening HD Floor Closer

• Single Acting, Handed
• Exterior or Interior Doors
• Weight to 450 lbs.*
• Door Width up to 4'0" (1219mm)
• 180° Swing 

This product qualifies for FREE SHIPPING!

PRICED PER PACKAGE

Special Additional Discounts! Add product to cart to view final pricing. See our Coupons and Discounts page for more information.

See tabs below for additional information
    • SKU
      RX27-180Nx605
    • Market price:$2,364.00
      • save 46%
    • Starting price: Price: $1,276.56 per set
    Additional discounts will be applied when added to cart!
     

     

    Additional Products in this Series:

    Parts included in Rixson 27 Complete Package for Heavy Duty 3/4" Offset Floor Door Closers

    Complete Package Includes:

    *Linked items can also be purchased separately on our site.
    All other components can be purchased through our office.

    Overview:

    • 180 Degree Swing - Auxilary floor or wall stop recommended
    • Single Acting
    • Handed
    • For Exterior or Interior Doors
    • For Doors Weighing up to 450 LB
    • For Doors Measuring up to 4'0" Wide

    Offset Hung: Pivot point is located 3/4" from heel edge of door. This dimension is a constant.

    Options:

    • Handing: Left Handed (LH) or Right Handed (RH). Specify handing. Click here to see How to Determine Door Handing.
    • Hold Open: Non-hold open (N) or Automatic hold open (A) at the same degree as dead stop. Automatic Hold open feature cannot be changed in the field.
    • Additional Options Include: Sealed Closer, Physically Handicapped, Cold Weather Fluid, 1-1/2" Offset, Extended Spindles, Fire Rating - See Additional Options tab for more information.

    Separate and Independent Valves: Three different controllable valves for latch speed, closing speed and back check. Valves are easily adjusted.

    • Latch Speed: Controls the last 10° of travel prior to latching. A door's travel speed at this time is critical to overcome weatherstripping, latch bolts and stack pressures.
    • Closing Speed: Controls the door from fully open until 10°. You will want to set this to a speed you feel comfortable with.
    • Back Check: This valve adjusts the amount of hydrautic resistance that begins at about 70° in the opening cycle.

    Vertical door adjustment. Doors hung on floor closers also allow for vertical adjustment throughout the life of the building to compensate for settlement.

    Intermediate pivot: Doors 60" to 90" requires one XM19 intermediate pivot, sold separately by selecting link. Each additional 30" warrants another intermediate pivot.

    Instance where top pivot cannot be used: For arch top doors or applications when the #180 top pivot can't be used, supply at least two XM190 load-bearing intermediate pivots, mounted together at the top of the straight vertical edge. Sold separately by selecting link.

    Threshold compatibility: This floor closer has a floor plate included. However, threshold installation is compatible as well and a template for 1/4" and 1/2" floor closer type threshold is provided. High quality threshold can be purchased through our office. Please call us at 845-388-1300.

    Fasteners: Wood screws and machine screws. Included.

    Priced per package.

    Note: All Rixson single acting closers have a preloaded spindle that causes the arm (door) to come to rest beyond the 0° position about 7° in towards the room. This assists the latch in engaging the strike, and helps overcome negative building pressures.

    Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

    This product has a 10 year guarantee against defects in workmanship and materials.
    Click here to view our Full Warranty Policy.

    For option with a build in deadstop see our Rixson 27 Complete Package Floor Door Closer.

      • SKU
        RX27-180Nx605
    • QuickShip
      No
    • Manufacturer
      Rixson
    • MPN
      27-180
    • Hold Open
      Non-Hold Open, Automatic Hold Open
    • Handing
      Right Handed, Left Handed
    • Finishes
      • Finish
        Polished Brass (US3), Satin Brass (US4), Polished Bronze (US9), Satin Bronze (US10), Oil Rubbed Bronze (US10B), Oil Rubbed Bronze, Equiv. (10BE), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Satin Chrome (US26D)

    Additional options can be purchased through our office at 845-388-1300.

    SEALED CLOSER (SC)

    Sealed Closer is designed for exterior doors or interior doors, with heavy exposure to water or cleaning solvents, protects the body. The closer body is placed in the cement case. A stainless steel cover plate is then gasketed and fastened to the cement case. This must be ordered with closer and cannot be ordered without the cement case.

     PHYSICALLY HANDICAPPED (PH)

    Phsically Handicapped Feature ensures the closer is in compliance with guidelines established in the American With Disabilities Act (ADA) and ensures that light opening forces are met. Options of 5 lbs opening force or 8.5 lbs opening force available.

    Lower opening forces mean lower closing forces. Physically Handicapped products should not be ordered for exterior doors or fire rated openings. Fire or Lifesafety openings take precedence over the convenience of ADA compliance. Securing a building is also a major concern and a lighter closer may not be strong enough to secure a latch bolt in a strike.

    Note: Rixson will not be responsible if exterior or fire rated doors will not close completely when PH products are supplied.

     COLD WEATHER FLUID (CWF)

    Cold weather fluid should be considered for installations where the ground temperature is constantly below 15°F. May be used in temperatures as low as -35°F.

    1-1/2" OFFSET

    Available with 1-1/2" Offset, for doors with 3/4" cladding or frames with applied molding. Maximum door weight cannot exceed 250 LB.

    EXTENDED SPINDLES

    Extended spindles available in 1/2" increments up to 2" longer than standard.

    FIRE RATED DOORS

    • Up to 3 Hours Assemblies: Will be supplied with a steel top pivot and a non-hold open closer. Intermediate pivot FM19 is required for this assembly.
    • 20 minute labeled doors available

     

    Click to Print Rixson 27-180 Installation Template

    Click to Print Rixson 27-180 Installation Guide

    Click to View Rixson 27-180 Installation Video

    Click to View Rixson Floor Closer Replacement Video

    Manuals and Guides: Click to Print Owner's Manual and Maintenance Tips and Troubleshooting Guide.

    For Easy Installation: Click the links to view and purchase our 185 Quickspotter Installation Kit and 2604 Pivot Allignment Tool for quick and easy installation. 
     

    Tools Required for Installation:
     

    Drill Plumb Bob Crow Bar
    Crescent
    Wrench
    Blue Loctite
    Breakable
    Threadlock
    Framing
    Square
    Torpedo 
    Level
    Large Flat
    #2 Phillips
    #3 Phillips
    Allen
    Wrench
    Quick-dry
    Cement
    & Trowel

     

     

     

     

     

    BHMA Certified

    Products indicated by this symbol have been voluntarily submitted to rigid third party testing and follow-up audits to confirm that these products fully and continuously meet or exceed the requirements of their respective ANSI/BHMA Standards. These products are listed in the BHMA Directory of Certified Products, published annually and available for purchase from BHMA. They are also posted and frequently updated on the BHMA web site at www.buildershardware.com.

    These products meet the requirements of ANSI/BHMA C06041 Standard for Door Closers.

     

    ADA Compliant*

    Products indicated by this symbol are access compliant by having installed height differences not over 1/2” with allowable edge and slope conditions. These products meet the requirements of ADAAG-1998 (Amended), ICC/ANSI A117.1-2003. ADA website: http://www.ada.gov/

    *Applies to products ordered with PH (Physically Handicapped) option only - can be purchased through our office.

     


    SHIPPING / PROCESSING TIME:


    This product ships directly from the manufacturer.

    Stocked Items: Please allow 5 - 7 Days to ship
    Non Stocked Items: Please allow 4 - 6 weeks to ship

    Expedited options are available, call for assistance
    • Domestic Shipping Fees- (Hawaii and Alaska not Included):
      • FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders).
      • There will be a flat $19.99 shipping and handling fee on orders under $300.00.
    • Alaska and Hawaii, Canada, and International Shipping:
    • Returns:
      • Stock Items can be returned with a 45% Restock fee. Items must be in new, resaleable condition.
      • All other items are custom made to order and are not returnable.
      • We are committed to your satisfaction. As a courtesy, we may, at our discretion accept returns with a minimum 45% restock fee.
      • CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within ten (10) days of receipt of goods.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
      • Return shipping is customer's responsibility. A return address will be provided with RMA#.
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.