Rixson #FA19, 3/4" Offset Intermediate Pivot For High Security Applications
This Rixson FA19 full mortise intermediate pivot has a 3/4" offset, and is used for asylums and high security applications. Pivot aids in floor closer and bottom pivot installation and maintains door alignment. This product is handed and available in a variety of finishes. May be used with fire door assemblies. See below for details and options.
Qualifies for FREE SHIPPING! See shipping tab for details.
PRICED PER PIECE
Rixson pivot sets are recognized to be the best way to hang a door because the weight of the door is supported by the floor instead of the door frame. This intermediate pivot is a full mortise, two knuckle, architectural grade and long lasting product, specifically for high security applications or installations where flat surfaces are objectionable.
Materials:Â Ferrous base metal.
Available Finishes: Bright Brass/605; Satin Brass/606; Bright Bronze/611; Satin Bronze/612; Dark Bronze/613; Dark Bronze Oxidized/613E; Bright Nickel/618; Satin Nickel/619; Flat Black/622; Bright Chrome/625; Satin Chrome/626 (All finishes comply with BHMA codes). Please note that all finishes are plated.
Offset Hung:Â Pivot point is located 3/4" from heel edge of door. This dimension is a constant. The pivot point is located in front of the door with the pivot knuckle visible. This feature is used on rabbeted frames and on single acting closers only.
Intermediate pivot aids in installation of floor closer and bottom pivot.
Maintains door alignment.
Calculate number of intermediate pivots: Doors 60" to 90" in height require 1 intermediate pivot. Each additional 30" warrants another intermediate pivot.
Handing: Left Handed (LH) or Right Handed (RH). Specify handing. Click here to see How to Determine Door Handing.Â
Note: Bevel heel edge of door 1/8" in 2".
Fasteners: Wood and machine  TORX screws. Included.
Priced per piece.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 2 year guarantee against defects in workmanship and materials.
Click here to view our Full Warranty Policy.
Click here to view our Heavy-Duty Load Bearing Intermediate Rixson ML19 Pivot for Lead Lined Doors.
-
QuickShipNo
-
ManufacturerRixson
-
MPNFA19
-
HandingRight Handed, Left Handed
- Finishes
-
FinishPolished Brass (US3), Satin Brass (US4), Polished Bronze (US9), Satin Bronze (US10), Oil Rubbed Bronze (US10B), Oil Rubbed Bronze, Equiv. (10BE), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Satin Chrome (US26D)
-
Â
Product Specs |
|
Installation |
|
Click to Print Installation Guide |
|
Compliance Details |
|
Â
Â
Â
Â
Â
Â
Â
Â
|
BHMA Certified Products indicated by this symbol have been voluntarily submitted to rigid third party testing and follow-up audits to confirm that these products fully and continuously meet or exceed the requirements of their respective ANSI/BHMA Standards. These products are listed in the BHMA Directory of Certified Products, published annually and available for purchase from BHMA. They are also posted and frequently updated on the BHMA web site at www.buildershardware.com. These products meet the requirements of ANSI/BHMA C07361 Standard for Door Pivots.  Fire Rating These products have been tested to meet the requirements of UL10B and UL10C, Fire Tests of Door Assemblies, UBC 7-2 Fire Tests of Door Assemblies Part I-1997 and NFPA 252 with the neutral pressure plane at 40º. |
Â