Home > Door Closers > Floor Closers > Rixson Complete Floor Closers > Rixson 20 COMPLETE PACKAGE - 3/4" Offset Lighter Duty Floor Closer For Interior Applications

Rixson 20 COMPLETE PACKAGE - 3/4" Offset Lighter Duty Floor Closer For Interior Applications

Rixson 20 COMPLETE PACKAGE - 3/4" Offset Lighter Duty Floor Closer For Interior Applications
Components Included in Complete Package of Rixson 20 Floor Door Closer Available Finishes of Rixson 20 Floor Door Closer Components included in Rixson 20 Floor Door Closer Satin Brass Rixson 20 Floor Door Closer for Interior Applications Satin Brass Rixson 20 Applied in Interior Door Frame Satin Brass Rixson 20 Applied on Interior Door Actual Product Image of Rixson 20 Floor Door Closer Components

• Single Acting, Handed
• Interior Doors
• Weight to 200 lbs.*
• Door Width up to 3'0" (914mm)


This product qualifies for FREE SHIPPING! See shipping tab for details.

Special Additional Discounts! Add product to cart to view final pricing. See our Coupons and Discounts page for more information.


Market price: $1,834.00
save 45%
Price: $1,008.70
Save to wishlist
Made in USA
SKU X20N_605
Options Left or Right Handed
Shipping See Shipping Tab Below


Additional Products in this Series:

Parts included in Rixson 20 Complete Package for 3/4" Offset Floor Door Closers

Complete Package Includes:

*Linked items can also be purchased separately on our site.
All other components can be purchased through our office.

Product Overview:

  • Single Acting
  • Handed
  • For Interior Door Applications
  • For Doors Weighing up to 200 LBs
  • For Doors with Widths up to 3'0"
  • Opening Degree: 180° Swing (No Dead Stop)
  • Non Hold Open
    See our full line of Door Holders and Stops which work in conjunction with this product.

Offset Hung: Pivot point is located 3/4" from heel edge of door. This dimension is a constant.


  • Handing: Left Handed (LH) or Right Handed (RH). Specify handing. Click here to see How to Determine Door Handing.
  • Additional Options Include: Physically Handicapped, Fire Rated, Extended Spindles. See Additional Options tab for more details.

Closing Speed: Single valve adjustable closing speed controls the door from 70° until 0°.  

Back Check: Built-in hydraulic back check cushions opening from 140°-180°.

Vertical door adjustment. Doors hung on floor closers also allow for vertical adjustment throughout the life of the building to compensate for settlement.

Intermediate pivot: Doors 60" to 90" in height require 1 XM19 intermediate pivot, sold separately by selecting link. Each additional 30" warrants another intermediate pivot.

Threshold compatibility: This floor closer has a floor plate included. However, threshold installation is compatible as well and a template for 1/4" and 1/2" floor closer type threshold is provided. High quality threshold can be purchased through our office. Please call us at 845-388-1300.

Fasteners: Wood screws and machine screws. Included.

Priced per package.

Note: All Rixson single acting closers have a preloaded spindle that causes the arm (door) to come to rest beyond the 0° position about 7° in towards the room. This assists the latch in engaging the strike, and helps overcome negative building pressures.

Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

This product has a 2 year guarantee against defects in workmanship and materials.
Click here to view our Full Warranty Policy.

Click here to view our Rixson 27-180 Floor Closer with Full Open Swing.

Product Specs

Additional Options can be purchased through our office, please contact us or call us at 845-388-1300.


Physically Handicapped Feature ensure floor closer is in compliance with guidelines established in the American With Disabilities Act (ADA) and ensures that light opening forces are met. 8.5 lbs opening force available.

Lower opening forces mean lower closing forces. PH products should not be ordered for exterior doors or fire rated openings. Fire or Lifesafety openings take precedence over the convenience of ADA compliance. Securing a building is also a major concern and a lighter closer may not be strong enough to secure a latch bolt in a strike.

Note: Rixson will not be responsible if exterior or fire rated doors will not close completely when PH products are supplied.


Up to 3 Hours Assemblies: Will be supplied with a steel top pivot and a non-hold open closer. Intermediate pivot FM19 is required for this assembly.


Extended spindles available in 1/2" increments up to 2" longer than standard.


Rixson 20 Installation Guide


Click to Print Rixson 20 Installation Template

Click to Print Rixson 20 Installation Guide

Manuals and Guides: Click to Print Owner's Manual and Maintenance Tips and Troubleshooting Guide.

For Easy Installation: Click on the link to view and purchase our 2604 Pivot Alignment Tool for quick and easy installation.


Tools Required for Installation:

Drill Plumb Bob Crow Bar
Blue Loctite
Large Flat
#2 Phillips
#3 Phillips
& Trowel


Compliance Details





BHMA Certified

Products indicated by this symbol have been voluntarily submitted to rigid third party testing and follow-up audits to confirm that these products fully and continuously meet or exceed the requirements of their respective ANSI/BHMA Standards. These products are listed in the BHMA Directory of Certified Products, published annually and available for purchase from BHMA. They are also posted and frequently updated on the BHMA web site at www.buildershardware.com.

These products meet the requirements of ANSI/BHMA C06071 Standard for Door Closers.


ADA Compliant*

Products indicated by this symbol are access compliant by having installed height differences not over 1/2” with allowable edge and slope conditions. These products meet the requirements of ADAAG-1998 (Amended), ICC/ANSI A117.1-2003. ADA website: http://www.ada.gov/

*Applies to products ordered with PH (Physically Handicapped) option only.


Shipping / Returns
  • Ship Time:
    • Stock QuickShip Items: If available, QuickShip Items are listed above. Quickship items ship within 5 business days. Quantities may be limited.
    • Expedite options are available. Please call to confirm stock and shipping time.
    • Standard Items: Items are custom made to order and require a lead time of 2-4 weeks.
    • Ships via major carriers, such as UPS or FedEx Ground, with tracking information provided.
  • Domestic Shipping Fees- (Hawaii and Alaska not Included):
    • FREE SHIPPING on orders over $200.00 (excludes oversized and freight orders).
    • There will be a flat $19.99 shipping and handling fee on orders under $200.00.
    • Oversized Items: Items 86" and above have an oversize surcharge of $70.00
    • Freight Orders: Items 95" and above require freight shipment and have a shipping charge of $150.00
    • Orders totals above $1,500.00 will ship free, regardless of size.
  • Alaska and Hawaii, Canada, and International Shipping:
  • Returns:
    • Stock Items can be returned with a 45% Restock fee. Items must be in new, resaleable condition.
    • All other items are custom made to order and are not returnable.
    • We are commited to your satisfaction. As a courtesy, we may, at our discretion accept returns with a minimum 45% restock fee.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
    • Return shipping is customer's responsibility. A return address will be provided with RMA#.
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Product reviews are only available to verified buyers of this product. To leave a review, please refer to the product review email we sent you.

Not yet rated. Be the first to Write a Review

Recently Viewed