Rixson 28x554 COMPLETE PACKAGE Center Hung Floor Closer With Flat, Low Profile Arm

RIXSON 28 x 554 COMPLETE PACKAGE is an architecural grade Center Hung, Heavy Duty Floor Closer with a flat, low profile arm for standard applications. The concealed arm is designed to eliminate visible adjusting screws on the face of the door. For use on single acting doors, this closer can carry loads up to 350 lbs and up to 4'0" wide and 8'6" high doors. Compatible for use on exterior or interior doors. Many finishes and options available, see below.

PRICED PER PACKAGE

This product qualifies for FREE SHIPPING!

Special Additional Discounts! Add product to cart to view final pricing. See our Coupons and Discounts page for more information.

See tabs below for additional information
    • SKU
      RX28Nx554_605
    • Market price:$2,120.00
      • save 46%
    • Starting price: Price: $1,144.80 per set
    Additional discounts will be applied when added to cart!
     

     

    Additional Products in this Series:

    Parts included in Rixson 28x554 Complete Package for Center Hung Floor Door Closers

    Complete Package Includes:

    *Linked items can also be purchased separately on our site.
    All other components can be purchased through our office.

    Product Overview:

    • Concealed arm is designed to eliminate visible adjusting screws on face of the door
    • Single acting
    • Handed
    • Exterior or interior doors
    • For doors weighing up to 350 LB
    • For doors measuring up to 4'0" x 8'6" (see below for taller doors)

    Available Finishes: Bright Brass/605; Satin Brass/606; Bright Bronze/611; Satin Bronze/612; Dark Bronze/613; Dark Bronze Oxidized/613E; Bright Nickel/618; Satin Nickel/619; Flat Black/622; Bright Chrome/625; Satin Chrome/626 (All finishes comply with BHMA codes)

    Options:

    • Handing: Left Handed (LH) or Right Handed (RH). Specify handing. Click here to see How to Determine Door Handing.

    • Opening Degree: Built-in positive dead stop prevents door from swinging beyond desired opening degree. Four options - 85°, 90°, 95°, 105°.

    • Hold Open: Non-hold open (NHO) or selective hold open (SHO) at the same degree as dead stop. Hold open feature can be turned off in the field.

    • Additional Options include: Sealed Closer, Delayed Action, Physically Handicapped, Extended Spindles, Cold Weather Fluid. See additional options tab for more details.

    Separate and Independent Valves: Three different controllable valves for latch speed, closing speed and back check. Valves are very sensitive. Usually slight adjustments do the job.

    • Latch Speed: Controls the last 10° of travel prior to latching. A door's travel speed at this time is critical to overcome weatherstripping, latch bolts and stack pressures.
       
    • Closing Speed: Controls the door from fully open until 10°. You will want to set this to a speed you feel comfortable with.
       
    • Back Check: This valve adjusts the amount of hydraulic resistance that begins at about 70° in the opening cycle. Back check should never be turned to a point where it acts as a dead stop for the door.

    Center Hung: Pivot point is centered in the thickness of door and can be adjusted laterally so that pivot point is moved closer to the lock edge of the door.

    Fire Rated Openings: Center hung doors are not compatible with fire rated openings.

    Extra Tall Doors: For doors over 8 foot 6 inches, top pivot #345 should be used instead of #340. Click here to purchase top pivot #X345.

    Frame Stop: Frame stop required on the header at the lock side. If it is not supplied by the frame manufacturer, the use of X60131 Applied Stop is recommended, can be purchased separately by selecting link.

    Threshold compatibility: This floor closer has a floor plate included. However, threshold installation is compatible as well and a template for 1/4" and 1/2" floor closer type threshold is provided. Be advised to use a separate piece of threshold to cover the closer for easy access in case of adjustments or replacement. Otherwise, entire threshold will need to be removed. High quality threshold can be purchased through our office. Please call us at 845-388-1300.

    Fasteners: Wood screws and machine screws. Included.

    Priced per package.

    Note: All Rixson single acting closers have a preloaded spindle that causes the arm (door) to come to rest beyond the 0° position about 7° in towards the room. This is to make sure the latch engages in the strike and to help overcome negative building pressures.

    Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

    This product has a 10 year guarantee against defects in workmanship and materials.
    Click here to view our Full Warranty Policy.

    Click here to view our Rixson HM27 Offset Hung Floor Closer for Hollow Metal Doors.

      • SKU
        RX28Nx554_605
    • QuickShip
      No
    • Manufacturer
      Rixson
    • MPN
      28x554
    • Handing
      Right Handed, Left Handed
    • Open Degree
      85°, 90°, 95°, 105°
    • Hold Open
      Non-Hold Open, Selective Hold Open
    • Finishes
      • Finish
        Polished Brass (US3), Satin Brass (US4), Polished Bronze (US9), Satin Bronze (US10), Oil Rubbed Bronze (US10B), Oil Rubbed Bronze, Equiv. (10BE), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Satin Chrome (US26D)

    To purchase with additional options, please contact us or call us at 845-388-1300.

     SEALED CLOSER

    Sealed Closer is designed for exterior doors or interior doors, with heavy exposure to water or cleaning solvents, protects the body. The closer body is placed in the cement case. A stainless steel cover plate is then gasketed and fastened to the cement case. This must be ordered with closer and cannot be ordered without the cement case.

     PHYSICALLY HANDICAPPED

    Physically Handicapped Feature ensures the closer is in compliance with guidelines established in the American With Disabilities (ADA) Act and ensures that light opening forces are met. Options of 5 lbs opening force or 8.5 lbs opening force available.

    Lower opening forces mean lower closing forces. Physically Handicapped products should not be ordered for exterior doors or fire rated openings. Fire or Lifesafety openings take precedence over the convenience of ADA compliance. Securing a building is also a major concern and a lighter closer may not be strong enough to secure a latch bolt in a strike.

    Note: Rixson will not be responsible if exterior or fire rated doors will not close completely when PH products are supplied.

     DELAYED ACTION (DA)

    The delayed action feature allows the door to remain ajar (at 70°for up to 40 seconds. Delayed action is operated by a separate valve and can be shut off if not needed.

    Note: This option cannot be ordered together with Selective Hold Open feature or Cold Weather Fluid (CWF) and is not recommended for exterior applications because of weather factors.

     COLD WEATHER FLUID (CWF)

    Cold weather fluid should be considered for installations where the ground temperature is constantly below 15°F. May be used in temperatures as low as -35°F.

    EXTENDED SPINDLES

    Extended spindles available in 1/2" increments up to 2" longer than standard.

     

    Click to Print Rixson 28x554 Installation Template

    Click to Print Rixson 28x554 Installation Guide

    Click to View Rixson Installation Video

    Click to View Rixson Floor Closer Replacement Video

    Manuals and Guides: Click to Print Owner's Manual and Maintenance Tips and Troubleshooting Guide.

    For Easy Installation: Click the links to view and purchase our 185 Quickspotter Installation Kit and 2604 Pivot Allignment Tool for quick and easy installation. 
     

    Tools Required for Installation:
     

    Drill Plumb Bob Crow Bar
    Crescent
    Wrench
    Blue Loctite
    Breakable
    Threadlock
    Framing
    Square
    Torpedo 
    Level
    Large Flat
    #2 Phillips
    #3 Phillips
    Allen
    Wrench
    Standard
    Cement
    & Trowel

     

     

     

     

     

     

    BHMA Certified

    Products indicated by this symbol have been voluntarily submitted to rigid third party testing and follow-up audits to confirm that these products fully and continuously meet or exceed the requirements of their respective ANSI/BHMA Standards. These products are listed in the BHMA Directory of Certified Products, published annually and available for purchase from BHMA. They are also posted and frequently updated on the BHMA web site at www.buildershardware.com.

    These products meet the requirements of ANSI/BHMA C06021 Standard for Door Closers.

     

    ADA Compliant*

    Products indicated by this symbol are access compliant by having installed height differences not over 1/2” with allowable edge and slope conditions. These products meet the requirements of ADAAG-1998 (Amended), ICC/ANSI A117.1-2003. ADA website: http://www.ada.gov/

    *Applies to products ordered with PH (Physically Handicapped) option only.


    SHIPPING / PROCESSING TIME:


    This product ships directly from the manufacturer.

    Stocked Items: Please allow 5 - 7 Days to ship
    Non Stocked Items: Please allow 4 - 6 weeks to ship

    Expedited options are available, call for assistance
    • Domestic Shipping Fees- (Hawaii and Alaska not Included):
      • FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders).
      • There will be a flat $19.99 shipping and handling fee on orders under $300.00.
    • Alaska and Hawaii, Canada, and International Shipping:
    • Returns:
      • Stock Items can be returned with a 45% Restock fee. Items must be in new, resaleable condition.
      • All other items are custom made to order and are not returnable.
      • We are committed to your satisfaction. As a courtesy, we may, at our discretion accept returns with a minimum 45% restock fee.
      • CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within ten (10) days of receipt of goods.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
      • Return shipping is customer's responsibility. A return address will be provided with RMA#.
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.