Rixson H40 BODY - Center Hung Double Acting Floor Closer Body Replacement, Up to 1,000 LB

Rixson H40 BODY REPLACEMENT is a replacement part for our extra heavy duty Center Hung Double Acting Floor Closer for Heavy Weight, High Traffic Applications. Closer can carry doors weighing up to 1,000 lbs and and measuring up to 4' wide, 8'6" high, with a minimum thickness of 2". Can be applied in interior and exterior settings. Many options available, see below for details.

PRICED PER PIECE

This product qualifies for FREE SHIPPING! See shipping and returns tab for details.

Special Additional Discounts! Add product to cart to view final pricing. See our Coupons and Discounts page for more information.

See tabs below for additional information
    • SKU
      RXH40NLAP
    • Market price:$3,156.00
      • save 46%
    • Starting price: Price: $1,704.24 per item
    Additional discounts will be applied when added to cart!
     

     

    Additional Products in this Series:

    Parts included in Rixson H40 Body Replacement Package for Center Hung Floor Door Closers

    Complete Package Includes: Floor Closer Body Only

    Product Overview:

    • Double Acting
    • Non-Handed
    • For Interior or Exterior Doors (see note below)
    • For Doors Weighing up to 1,000 Lbs
    • For Doors Measuring up to 4'0" x 8'6" (see below for taller doors)
    • For Door with Minimum Thickness of 2"
    • Thrust bearing for greater load capacity
    • Arm does NOT allow door centering adjustment (not recommended for pair of double doors)
    • Mechanism returns door to center
    • Maximum door swing is 103°
    • Adjustable closing speed valves for each direction of the door swing

    Exterior Application Settings: Note, double acting closers should not be applied on primary means of egress.

    Center Hung: Pivot point is centered in the thickness of door and can be adjusted laterally so that pivot point is moved closer to the lock edge of the door. A frame or angle stop is required at the lock edge of the door and pivot edge of door must be radiused or rounded.

    Fire Rating: Center hung closers are not allowed for fire rated doors.

    Options:

    • Hold Open: Non-hold open (NHO) or Automatic Hold Open (AHO). Automatic Hold Open is factory installed at 90° (requires a 93° swing) or 100° (requires a 103° swing), select from options above. Feature cannot be changed in the field.

    • Additional Options: Sealed Closer, Physically Handicapped, Cold Weather Fluid, Extended Spindles. See additional options tab for more details.

    Extra Tall Doors: For doors over 8'6", top pivot #345 should be used instead of #H340. If your doors are extra tall, order this product without a top pivot and purchase #H345 separately by calling us at 845-388-1300.

    Frame Stop: Auxiliary frame stop required-overhead or floor type. Not supplied by manufacturer.

    Fasteners: Wood screws and machine screws. Included.

    Priced per package.

    Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

    This product has a 10 year guarantee against defects in workmanship and materials.
    Click here to view our Full Warranty Policy.

    For similar version with a side load arm for doors 1-3/4" thick click here to view the Rixson H40 X 587 ARM.

      • SKU
        RXH40NLAP
    • QuickShip
      No
    • Manufacturer
      Rixson
    • MPN
      H40 LAP
    • Hold Open
      Non-Hold Open, 90 Degree Automatic Hold Open, 100 Degree Automatic Hold Open

     

    Note, product specs include components from our Rixson H40 Complete Package Floor Door Closer

    Click to Print Product Specs

    template for heavy duty center hung rixson floor closer

     

     

    Additional options can be purchased through our office, please contact us or call us at 845-388-1300.

     SEALED CLOSER

    Sealed Closer is designed for exterior doors or interior doors, with heavy exposure to water or cleaning solvents, protects the body. The closer body is placed in the cement case. A stainless steel cover plate is then gasketed and fastened to the cement case. This must be ordered with closer and cannot be ordered without the cement case.

     PHYSICALLY HANDICAPPED (PH)

    Physically Handicapped Feature ensures the closer is in compliance with guidelines established in the American With Disabilities (ADA) Act and ensures that light opening forces are met. Options of 5 lbs opening force or 8.5 lbs opening force available.

    Lower opening forces mean lower closing forces. Physically Handicapped products should not be ordered for exterior doors or fire rated openings. Fire or Lifesafety openings take precedence over the convenience of ADA compliance. Securing a building is also a major concern and a lighter closer may not be strong enough to secure a latch bolt in a strike.

    Note: Rixson will not be responsible if exterior or fire rated doors will not close completely when PH products are supplied.

     COLD WEATHER FLUID (CWF)

    Cold weather fluid should be considered for installations where the ground temperature is constantly below 15°F. May be used in temperatures as low as -35°F.

    EXTENDED SPINDLES

    Extended spindles available in 1/2" increments up to 2" longer than standard.

     

    Click to Print Rixson H40 LAP Installation Template

    Click to Print Rixson H40 LAP Installation Guide

    Manuals and Guides: Click to Print Owner's Manual and Maintenance Tips and Troubleshooting Guide.

    For Easy Installation: Click the links to view and purchase our 185 Quickspotter Installation Kit and 2604 Pivot Allignment Tool for quick and easy installation. 
     

    Tools Required for Installation:
     

    Drill Plumb Bob Crow Bar
    Crescent
    Wrench
    Blue Loctite
    Breakable
    Threadlock
    Framing
    Square
    Torpedo 
    Level
    Large Flat
    #2 Phillips
    #3 Phillips
    Allen
    Wrench
    Standard
    Cement
    & Trowel

     

     

     

     

     

    BHMA Certified

    Products indicated by this symbol have been voluntarily submitted to rigid third party testing and follow-up audits to confirm that these products fully and continuously meet or exceed the requirements of their respective ANSI/BHMA Standards. These products are listed in the BHMA Directory of Certified Products, published annually and available for purchase from BHMA. They are also posted and frequently updated on the BHMA web site at www.buildershardware.com.

    These products meet the requirements of ANSI/BHMA C06021 Standard for Door Closers.

     

    ADA Compliant*

    Products indicated by this symbol are access compliant by having installed height differences not over 1/2” with allowable edge and slope conditions. These products meet the requirements of ADAAG-1998 (Amended), ICC/ANSI A117.1-2003. ADA website: http://www.ada.gov/

    *Applies to products ordered with PH (Physically Handicapped) option only.

     


    SHIPPING / PROCESSING TIME:


    This product ships directly from the manufacturer.

    Stocked Items: Please allow 5 - 7 Days to ship
    Non Stocked Items: Please allow 4 - 6 weeks to ship

    Expedited options are available, call for assistance
    • Domestic Shipping Fees- (Hawaii and Alaska not Included):
      • FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders).
      • There will be a flat $19.99 shipping and handling fee on orders under $300.00.
    • Alaska and Hawaii, Canada, and International Shipping:
    • Returns:
      • Stock Items can be returned with a 45% Restock fee. Items must be in new, resaleable condition.
      • All other items are custom made to order and are not returnable.
      • We are committed to your satisfaction. As a courtesy, we may, at our discretion accept returns with a minimum 45% restock fee.
      • CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within ten (10) days of receipt of goods.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
      • Return shipping is customer's responsibility. A return address will be provided with RMA#.
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.