Rixson HM27 COMPLETE PACKAGE - 3/4" Offset Heavy Duty Floor Closer for Hollow Metal Doors
• Single Acting, Handed
• Exterior or Interior Doors
• 1-3/4" Hollow Metal Doors/Frames
• Weight to 250 lbs.
• Door Width up to 4'0" (1219mm)
• Stock Hollow Metal Doors and Frames with Hinge Prep
This product qualifies for FREE SHIPPING!
PRICED PER PACKAGE
Special Additional Discounts! Add product to cart to view final pricing. See our Coupons and Discounts page for more information. |
Additional Products in this Series: | |
Rixson 27 Complete Package Includes:
*Linked items can also be purchased separately on our site. |
Product Overview:
- Single Acting
- Interior or Exterior
- 1-3/4" Hollow Metal Doors and Frames
- Surface mounted bottom arms
- For Doors Weighing up to 250 LB
- For Doors Measuring up to 4'0" Wide
Offset Hung: Pivot point is located 3/4" from heel edge of door. This dimension is a constant.
Included Hinges: This closer is designed for 1-3/4" stock hollow metal doors and frames with standard weight 4-1/2" hinge preparation. Three 4-1/2" ball bearing hinges with 3/4" offset are provided. Doors over 90" in height warrant an additional hinge. To purchase a fourth hinge call us at 845-388-1300.
Options:
- Handing: Left Handed (LH) or Right Handed (RH). Specify handing. Click here to see How to Determine Door Handing.
- Opening Degree: Built-in positive dead stop prevents door from swinging beyond desired opening degree. Options: 85°, 90°, 95°
- Hold Open: Non-hold open (NHO) or selective hold open (SHO) at the same degree as dead stop. Hold open feature can be turned off.
- Additional Options Include: Sealed Closer, Delayed Action, Cold Weather Fluid, Physically Handicapped, Extended Spindles, Fire Rating. See options tab for more information.
Separate and Independent Valves: Three different controllable valves for latch speed, closing speed and back check. Valves are very sensitive. Usually slight adjustments do the job.
- Latch Speed: Controls the last 10° of travel prior to latching. A door's travel speed at this time is critical to overcome weatherstripping, latch bolts and stack pressures.
- Closing Speed: Controls the door from fully open until 10°. You will want to set this to a speed you feel comfortable with.
- Back Check: This valve adjusts the amount of hydrautic resistance that begins at about 70° in the opening cycle. Back check should never be turned to a point where it acts as a dead stop for the door.
Threshold compatibility: This floor closer has a floor plate included. However, threshold installation is compatible as well and a template for 1/4" and 1/2" floor closer type threshold is provided. High quality threshold can be purchased through our office. Please call us at 845-388-1300.
Fasteners: 1/2 wood screws and all machine screws. Included.
Priced per package.
Note: All Rixson single acting closers have a preloaded spindle that causes the arm (door) to come to rest beyond the 0° position about 7° in towards the room. This assists the latch in engaging the strike, and helps overcome negative building pressures.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 10 year guarantee against defects in workmanship and materials.
Click here to view our Full Warranty Policy.
Click here to view our Rixson L27 COMPLETE Floor Door Closer for Extra Heavy Duty or Lead Lined Doors.
-
QuickShipNo
-
ManufacturerRixson
-
MPNHM27
-
Hold OpenNon-Hold Open, Selective Hold Open
-
Open Degree85°, 90°, 95°
-
HandingRight Handed, Left Handed
- Finishes
-
FinishPolished Brass (US3), Satin Brass (US4), Polished Bronze (US9), Satin Bronze (US10), Oil Rubbed Bronze (US10B), Oil Rubbed Bronze, Equiv. (10BE), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Satin Chrome (US26D)
-
Products can be purchased through our office, please contact us or call us at 845-388-1300.
SEALED CLOSER |
|
Sealed Closer is designed for exterior doors or interior doors, with heavy exposure to water or cleaning solvents, protects the body. The closer body is placed in the cement case. A stainless steel cover plate is then gasketed and fastened to the cement case. This must be ordered with closer and cannot be ordered without the cement case. |
|
PHYSICALLY HANDICAPPED |
|
Physically Handicapped Feature ensures the closer is in compliance with guidelines established in the American With Disabilities (ADA) Act and ensures that light opening forces are met. Options of 5 lbs opening force or 8.5 lbs opening force available. Lower opening forces mean lower closing forces. Physically Handicapped products should not be ordered for exterior doors or fire rated openings. Fire or Lifesafety openings take precedence over the convenience of ADA compliance. Securing a building is also a major concern and a lighter closer may not be strong enough to secure a latch bolt in a strike. Note: Rixson will not be responsible if exterior or fire rated doors will not close completely when PH products are supplied. |
|
DELAYED ACTION |
|
The delayed action feature allows the door to remain ajar (at 70°) for up to 40 seconds. Delayed action is operated by a separate valve and can be shut off if not needed. Note: This option cannot be ordered together with Selective Hold Open feature or Cold Weather Fluid (CWF) and is not recommended for exterior applications because of weather factors. |
|
COLD WEATHER FLUID (CWF) |
|
Cold weather fluid should be considered for installations where the ground temperature is constantly below 15°F. May be used in temperatures as low as -35°F. |
|
EXTENDED SPINDLES |
|
Extended spindles available in 1/2" increments up to 2" longer than standard. |
|
FIRE RATED DOORS |
|
For fire rated assemblies up to 3 Hours. This package will be supplied with 3 steel hinges and a non-hold open closer. |
Click to Print Rixson HM27 Installation Template Click to Print Rixson HM27 Installation Guide Manuals and Guides: Click to Print Owner's Manual and Maintenance Tips and Troubleshooting Guide. For Easy Installation: Click the links to view and purchase our 185 Quickspotter Installation Kit for quick and easy installation. Tools Required for Installation:
|
|
BHMA Certified Products indicated by this symbol have been voluntarily submitted to rigid third party testing and follow-up audits to confirm that these products fully and continuously meet or exceed the requirements of their respective ANSI/BHMA Standards. These products are listed in the BHMA Directory of Certified Products, published annually and available for purchase from BHMA. They are also posted and frequently updated on the BHMA web site at www.buildershardware.com. These products meet the requirements of ANSI/BHMA C06041 Standard for Door Closers.
ADA Compliant* Products indicated by this symbol are access compliant by having installed height differences not over 1/2” with allowable edge and slope conditions. These products meet the requirements of ADAAG-1998 (Amended), ICC/ANSI A117.1-2003. ADA website: http://www.ada.gov/ *Applies to products ordered with PH (Physically Handicapped) option only.
|