Falcon XX-M Crossbar Mortise Exit Device, High Traffic Applications - Cylindrical Functions and Trims
This product has been discontinued. For a similar product, please see our Falcon 1990 Series, Concealed Vertical Rod Crossbar Exit Device.
Exit Device with Mortise Lock for high traffic applications.
Product Options:
- XX-M Crossbar Exit Device with Mortise Lock
- F-XX-M Fire-Rated Crossbar Exit Device with Mortise Lock
- Falcon XX-M-EO Mortise Lock Crossbar Exit Device with Exit Only Function.
Applications: Single point, mortise latch with traditional crossbar design.
Functions and Trims: Large trim selection available with options for functions including: Night Latch, Dummy Trim, Blank Escutcheon and Standard Cylinder. See options tab for full selection.
Cylinder: All functions are provided less cylinder. To purchase cylinders please contact us or call our office at 845-388-1300.
Handing: Specify Right Hand Reverse (RHR) or Left Hand Reverse (LHR). To determine door handing see our How To Determine Door Handing and Swing.Â
Finishes: Available in finishes; US4, US10, SP313, US32D, US26D, US3, US26, US32.
Materials:
- Arms- made with forged brass, aluminum and investment cast stainless steel.
- Crossbars- 1" O.D., brass, bronze and stainless steel. Reinforced crossbars available.
- Latch bolt - 3/4" throw. Deadlocking latchbolt standard. Â
- Center case and working parts- Center case is pressure die cast aluminum with heavy wrought, forged, investment cast and sintered metal parts.
Strikes: 1279 standard. F1280 optional, "B" label (1 1/2 hour) available through our office.
Dogging Feature: 1/2" turn hex dogging standard. No threaded parts to wear out. Rim Cylinder supplied (at additional cost) for functions requiring cylinder dogging.
Mortise Lock: Heavy wrought lock case with investment cast or sintered stainless steel parts. Lock face is forged brass - fits standard cutout. Locks are designed to fit standard preparation. ANSI A115.1 for 1 3/4" doors. Deadlocked when auxiliary bolt is depressed 5/16".
Door Thickness:Â 1 3/4" thick doors, wood or metal. Specify thickness if other than 1 3/4".
Door Widths: For doors up to 4'0" x 1-3/4" full flush with 5/8" high frame stop unless specified otherwise.Â
Mounting Height: 40 1/4" from CL to finished floor. For mortise lock prep per ANSI A115.1-1990.
Projections: 5" maximum, 4" dogged.
Stock Sizes: 4'0" standard
Stile: 4 1/2" minimum
Electric Function: Can be interfaced with building security systems. Lock/unlock and security monitoring available.
Fasteners: All mounting screws are concealed. Sheet metal screws standard for device, mortise lock is machine screws. All machine screws can be ordered. Sex bolts may be ordered to use with hollow core wood, composite or light gauge hollow metal.
Certifications:
- Meets ANSI A156.3-2001 Grade 1 standard.
- F-XX-R UL listed  "A" label (3 hr. ); 4'0" x 8'0"; 8'0" x 10'0". "B" label ( 1 1/2 hr.) with F1280 open back strike.
Installation: See Installation Tab for complete installation instructions.
Additional Options: Including electrical modifications are available through our office. To order please contact us or call our office at 845-388-1300.
Priced per piece
This product has a 10 year warranty against defects in workmanship and materials.
Click here to view our Full Warranty Policy.Â
Click here to view our Falcon XX-C Crossbar Exit Device with Concealed Vertical Rod.Â
-
QuickShipNo
-
ManufacturerFalcon
-
MPNXX-M; F-XX-M
-
Product OptionsExit Device XX-M, Fire-Rated Exit Device F-XX-M
-
Finish OptionsBright Brass #US3, Bright Chrome #US26, Powder Coated Duranodic #SP313, Stainless Steel #US32, Satin Brass #US4, Satin Bronze #US10, Satin Stainless Steel #US32D, Satin Chrome #US26D
-
HandingRight Hand Reverse (RHR), Left Hand Reverse (LHR)
-
Trim OptionsAthena Trim #815, Knob Trim #811, Dane Lever #812
-
FunctionExit Device with Blank Escutcheon, Exit Device with Night Latch, Exit Device with Dummy Trim, Exit Device with Cylinder
Trim Options for XX-M and F-XX-M:
NOTE: Lever Trims are provided standard as Dane Levers, all additional options including Vandal Resistant levers can be purchased through our office. See below for full selection. To order, please contact us or call our office at 845-388-1300.Â