Hager 1253, Half Surface, Single Acting Spring, Steel Hinge
Half Surface Architectural, single acting spring hinge, by Hager, with three knuckles and square corner. Spring hinge for automatic closing of door. Steel with steel components. Variety of sizes and finishes available.
PRICED PER PIECE - See full product details and specs in the tabs below
See Hager Hinges Color Chart for available finishes and details.
This commercial grade Architectural hinge is a half surface spring hinge. It is square corner, single acting and for the use of automatic closing of doors.
Available Sizes:
Hinge Size | Gauge of Metal | Hole Count | Machine Screw Size | ||
Inches | mm | Door Leaf | Jamb Leaf | ||
4-1/2" | 114 | 0.134 | 7 | 2 x 1/4-20 with grommet nuts | 1/2 x 12-24 |
Additional Hinge Dimensions:
Hinge Size | Door Leaf Width | Jamb Leaf Width | Door Leaf Offset | Application | |||||
Inches | mm | Inches | mm | Inches | mm | Inches | mm | Inches | mm |
4-1/2" | 114 | 2-9/16" | 65 | 2" | 52 | 1/2" | 14 | 1-1/2" | 38 |
Door Size and Weight recommendations:
Size | Recommended Max Door Wt | # of Spring Hinges | # of Ball Bearing Hinges | Spring Hinge Location | |
lbs | kg | ||||
4-1/2" | 70 | 32 | 1 | 2 | Center |
115 | 52 | 2 | 1 | Top or Bottom | |
150 | 68 | 3 | -- | All |
Custom finishes available. For details and pricing please contact us or call us at 845-388-1300.
For maximum versatility, use all spring hinges or a combination of spring and ball bearing hinges. Do not use plain bearing hinges.
Adjustable Tension: You could set the tension easily, as you need, using a tension bar and set pin (provided). See Installation Instructions for more information. Full spring tension may not be required.
Strong wind conditions, drafts, carpeting drag, twisted/misaligned frames or weather-stripping on doors may require additional spring hinges.
Usage on Fire Rated Doors: NFPA 80 has restricted the use of architectural grade spring hinges to fire rated doors of a maximum size of 3'0" x 7'0". Hager spring hinges have been tested and labeled for up to a 4'0" x 8'0" door when a minimum of three springs are used.
Priced per piece.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product data tab for exact measurements.
This product has a 3 year guarantee against defects in workmanship and materials.
Click here to view all our Half Surface Five Knuckle Hinges.
-
QuickShipNo
-
ManufacturerHager Companies
-
MPN1253
- Product Design
-
Hinge CategoryHalf Surface Hinge
-
Base MaterialSteel
-
Usage LevelStandard Duty
-
ThrowStandard Throw
-
Bearing TypeSingle Acting Spring
-
Knuckles3 Knuckle Hinge
-
Pin TypeStandard Hinge Pin
-
Hinge Tip TypeButton Tip
-
Hinge CornerSquare Corner
-
Hole PatternCommercial "C" Pattern
-
Number of Holes7 Holes
-
- Dimensions
-
Hinge Thickness.134" Thick
-
Hinge Height4-1/2"
-
- Finishes
-
FinishPrime Coat (USP), Polished Brass (US3), Satin Brass (US4), Satin Bronze (US10), Antique Bronze (US10A), Oil Rubbed Bronze (US10B), Satin Chrome (US26D)
-
- Compliance Details
-
Compliance DetailsBHMA Certified, UL Listed
-
ANSI DesignationK81081F, A156.1
-
Warranty3 Year Limited Warranty
-
Click to Print Spring Hinge Template
Click to Print Installation Instructions
Spring Hinge Template.
All finishes comply with BHMA (Builders Hardware Manufacturing Association) Standard A156.18:
- Prime Coat-USP
- Bright Brass-US3
- Satin Brass-US4
- Satin Bronze-US10
- Antique Bronze Laquered-US10A
- Antique Bronze Oiled-US10B
- Satin Chromium Plated-US26D
Hinge complies with ANSI K81081F.