Pemko #273B Half Threshold, 3" (W) Bronze, .25" (H)
A half threshold is a simple way to correct a floor offset between rooms and eliminate the tripping hazard associated with differences in floor surface heights. This half threshold is ADA Compliant, fills offsets of .25" and has a 3" width. Length is custom cut to size.
PRICED PER FOOT
This product is also available in aluminum finishes, see our 3" Aluminum Half Threshold, .25" H
This product is also available in aluminum finishes, see our 3" Aluminum Half Threshold, .25" H
Half Thresholds corrects offsets in floors and removes the tripping hazards associated with changes in floor surface heights.
Width: 3"
Offset Height: .25"
Length: Custom cut to size up to 104" (Larger sizes can be purchased through our office)
Finish: Bronze mill finish (Oil rubbed bronze can also be purchased for an additional 40% of standard bronze finish).
Compliance Details: ADA / Wheelchair Accessible, BHMA Certified, Fire Rated, UL Listed
Installation: Installation instructions and screws provided. Screws are colored to coordinate with door hardware. If threshold is being drilled into concrete, an Expansion Anchor is recommended.
Drilling: Threshold is drilled along the center line for easy installation
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our full Warranty Policy.
For higher clearance, see our 3" Aluminum or Bronze Threshold, .5" Threshold.
Click to View Ratings Explained
Finishes Comply with the Following ANSI / BHMA Codes:
- Bronze Mill Finish (Brass) - US4 / 720