Flex-Tread Anti-Slip Tape Roll is an easy and economical way to prevent slips. It is easily applied to many applications such as Stairs, Equipment and Walkways and can be used in interior and exterior environments. Length per roll is 60' and is available in a large selection of widths and colors, select from options below.
PRICED PER ROLL - See full product details and specs in the tabs below
See Flex-Tread Color Chart for available colors.
Wooster 100 Abrasive Cast Safety Tread has many uses in new construction and existing building projects. The cross-hatched tread functions as a landing platform, floor plate or cover, or expansion joint cover.
Choose from Alumogrit (Cast Aluminum) and Ferrogrit (Cast Iron) and specify custom depth and length in dropdown below.
PRICED PER FOOT - See full product details and specs in the tabs below
Wooster 103 Abrasive Cast Safety Tread or Nosing serves as structural treads with bent-plate risers or as nosings for full width of stair. Riser measures .750".
Choose from Alumogrit (Cast Aluminum) and Ferrogrit (Cast Iron) and specify custom width and length in dropdown below.
Countersunk holes and anchors can be chosen as well.
PRICED PER FOOT - See full product details and specs in the tabs below
Wooster Flexmaster stair treads have an abrasive anti-slip surface for improved safety in areas of heavy use. Tread is applied to existing construction.
Available in the following depths: 6.5”, 9.00”, and 11.00”
PRICED PER FOOT - See full product details and specs in the tabs below
Wooster’s highly popular Supergrit + NITEGLOW stair treads and nosings contain abrasive anti-slip filler over half the tread surface and NITEGLOW glow-in-the-dark abrasive filler covering the second half of the surface. Tread is applied into new concrete construction, secured by a sure hold anchor.
The NITEGLOW® strip allows clear visiblity of step edge in darkness. Abrasive filler is available in 11 different colors.
Available depth: 3.00" Inches
PRICED PER FOOT - See full product details and specs in the tabs below
These No-Slip Ladder Cap Treads are NAVSEA Approved and comply with MiL-T-24634 (SH) for installation on inclined ladders on US Navy Ships. Cap Treads can be placed over existing worn out tread for easy installation.
Abrasive grit on the surface of the tread reduce slips and falls. Product 842 has a 4" depth, product 862 has a 6" depth, and productn 892 has a 9" depth.
CUSTOM CUT TO SIZE
These No-Slip Ladder Treads are NAVSEA Approved and comply with MiL-T-24634 (SH) for installation on inclined ladders on US Navy Ships.
Abrasive grit on the surface of the tread reduces slips and falls. Product 841 has a 4" depth, product 861 has a 6" depth, and product 891 has a 9" depth.
CUSTOM CUT TO SIZE
Wooster Skimcrete XL which is a fast drying, blended cement patch.This product is trowelable and adhesive friendly, having the lowest alkality of blended cement patches. Skimcrete XL is easy to work with on virtually any interior surface.
Directions for mixing are shown on the bucket.
50 Lb. Drum
Priced Per Piece- See Product details and specs in tabs below
Wooster Spectra for new concrete steps is an extruded aluminum safety nosing with Sure Hold Anchors which is placed flush over the edge of the step.
Abrasive anti-slip filler extends over the entire radius of the curved nosing to provide a safe walking surface.
Available in 18 different colors and three depths. Custom cut to size. See dropdown below.
PRICED PER FOOT - See full product details and specs in the tabs below
This Two Stage, No-Slip Stair Nosing with a 2.00" depth is a safe and a smart product that reduces slipping without reducing staircase aesthetics.
Nosing is designed for installation in newly set steel pan or poured concrete stairs, and can come with disposable wood insert for use during construction phase for a fresh, clean appearance.
Available in 18 different colors and is custom cut to size.
MAXIMUM LENGTH 8 FEET
This Two Stage, No-Slip Stair Nosing is a safe and a smart product that reduces slipping without reducing staircase aesthetics. The NITEGLOW® option allows clear visiblity of step edge in darkness.
Nosing is designed for installation in newly set steel pan or poured concrete stairs, and can come with disposable wood insert for use during construction phase for a fresh, clean appearance.
Nosing has a 3.00" depth and is available in 18 different colors and is custom cut to size.
MAXIMUM LENGTH 8 FEET
Wooster WP1and WP-24 are extruded aluminum Safety Treads which are set into concrete or wood steps with anchors or adhesives. Abrasive anti-slip filler extends over the entire radius of the nosing to provide a safe walking surface.
Available in two depths and 18 colors and length is custom cut to size.
Treads are provided with countersunk holes and fasteners if indicated in anchors dropdown below.
PRICED PER FOOT - See full product details and specs in the tabs below