Home > Hinges > Pivot Hinges > Reinforcing Pivots

Reinforcing Pivots

Full Surface Reinforcing Pivots adds years of life to openings where the hinges or hinge reinforcements have failed. An economical way to solve door sag problems, reinforcing pivots take the load off the top hinge and transfer it to screws that will not pull out. It can also be applied to heavy doors to prevent sagging problems from occuring.

Products

Hager 251, Full Surface Reinforcing Pivot, For 3-1/2" Hinges on 1-3/8" Doors
Hager 251, Full Surface Reinforcing Pivot, For 3-1/2" Hinges on 1-3/8" Doors
SKU: H251-LH

Hager 251 Heavy Weight Full Surface Reinforcing Pivot is applied to the top of door when hinge reinforcement is required. Fits 3-1/2" Wide Butt Hinges, with 5/8" projection on a 1-3/8" Door. Door Pivot is made of Zinc Coated Steel and is handed.

Starting price $93.40 per item
save 50%
Hager 252, Full Surface Reinforcing Pivot, For 4" Hinges on 1-3/4" Doors
Hager 252, Full Surface Reinforcing Pivot, For 4" Hinges on 1-3/4" Doors
SKU: H252-LH

Hager 252 Heavy Weight Full Surface Reinforcing Pivot is applied to the top of door when hinge reinforcement is required. Fits 4" Wide Butt Hinges, with 1/2" projection on a 1-3/4" Door. Door Pivot is made of Zinc Coated Steel and is non-handed.

Starting price $93.40 per item
save 50%
Hager 253, Full Surface Reinforcing Pivot, For 4-1/2" Hinges on 1-3/4" Doors
Hager 253, Full Surface Reinforcing Pivot, For 4-1/2" Hinges on 1-3/4" Doors
SKU: H253

Hager 253 Heavy Weight Full Surface Reinforcing Pivot is applied to the top of door when hinge reinforcement is required. Fits 4-1/2" Wide Butt Hinges, with 3/4" projection on a 1-3/4" Door. Door Pivot is made of Zinc Coated Steel and is non-handed.

Starting price $93.40 per item
save 50%
Hager 254, Full Surface Reinforcing Pivot, For 5" Hinges on 1-3/4" Doors
Hager 254, Full Surface Reinforcing Pivot, For 5" Hinges on 1-3/4" Doors
SKU: H254

Hager 254 Heavy Weight Full Surface Reinforcing Pivot is applied to the top of door when hinge reinforcement is required. Fits 5" Wide Butt Hinges, with 1" projection on a 1-3/4" Door. Door Pivot is made of Zinc Coated Steel and is non-handed.

Starting price $93.40 per item
save 50%
Markar B1921 Reinforcing Pivot, Full Surface Non Handed
Markar B1921 Reinforcing Pivot, Full Surface Non Handed
SKU: MB1921

Full Surface B1921 Non-Handed Pivot by Markar Architectural Products. Reinforcing pivot for use on doors where the top hinge needs reinforcement. Zinc plated finish over cold-rolled steel with 1/2" offset to match pivot point of 4" wide hinge. 

PRICED PER PIECE

Starting price $50.70 per item
save 35%
Markar B1923 Reinforcing Pivot, Full Surface Non-Handed With 3/4" Offset
Markar B1923 Reinforcing Pivot, Full Surface Non-Handed With 3/4" Offset
SKU: MB1923

Full Surface Reinforcing Pivot by Markar Architectural Products with 3/4" offset to match pivot point of 41/2" wide hinge. Heavy Duty, non-handed pivot for use on doors where the top hinge needs reinforcement.  Zinc plated finish over cold-rolled steel.

PRICED PER PIECE

Starting price $50.70 per item
save 35%