Hager 453/454, Double Lipped Strike for 1/8" Inset Hung Doors
Mortised architectural double lipped strike plate for 1/8" inset hung doors, by Hager Companies. Allows doors to swing in both directions without damaging the frame. Base material is brass. Two sizes available in Satin Chromium Plate.
PRICED PER PIECE - See full product details and specs in the tabs below
See Hager Hinges Color Chart for a detailed list of Hager finishes.
Double Lipped Strike: Hager 600/611/612Allows doors to be opened in both directions without damaging the frame.
1/8" Inset Hung Doors: This strike is for doors installed 1/8 of an inch from the surface of the door jamb.
Available Sizes:
Standard latchbolt cutout is 1-1/4" x 11/16" Standard strike plates are optimized for cylindrical locks/latches mounted on 1-3/4" thick doors. Mortise lock applications require special latch cutout location (consult specific manufacturers for variations of cutout dimensions). Custom colors availablecontact us or call us at 845-388-1300. May be used on listed fire rated or labeled door openings. Installation screws provided. Priced per piece. Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements. Click here to view all our Hager Hinges. To view all Hager pivots, see How to Choose an Architectural Pivot Hinge.
Face Plate
Guage of Metal
Hole Count
Screw Size
Inches
mm
5-3/4 x 2-3/4
146 x 70
0.093
6
1/2 x 8-32 FH
6-3/4 x 2-3/4
171 x 70
0.093
6
Finishes Available: Materials: Brass