HES 7000C Complete Pac Electric Strike, Faceplates Included, Preload Solution, For Cylindrical Latchbolts up to a 5/8" Throw
The HES 7000C Complete Pac electric strike works with all brands of cylindrical latchbolts up to a 5/8" throw. This strike features a preload release function that allows it to operate smoothly under additional loads on the door. It has an in-frame horizontal design that allows for a simple installation process, as well as easy adjustment to accommodate the position of the latchbolt. The Pac includes a HES 7000 electric strike body and two faceplates for cylindrical locksets. Available in a choice of options; select from the dropdown below.
See full product details and specs in tabs below.
PRICED PER PIECE
Electric strikes are electromechanical door keepers that act as a powerful security by holding the lockbolt in place. This HES 7000C Complete Pac electric strike works with all brands of cylindrical latchbolts up to a 5/8" throw.
Parts Included:
- Electric strike body
- 12 & 24 volt pigtail connectors
- 791 & 792 faceplates (for details and measurements, view the faceplates tab below).
To purchase this strike body without a faceplate kit, view the HES 7000 Electric Strike.
Available Finishes: Satin stainless steel (630)
Material: Heavy duty stainless steel
Depth: 1-11/16" (43 mm)
Height: 4-7/8" (123.4 mm)
Shim Height: 3-3/8" (85.7 mm)
Distance between Mounting Holes: 4-1/8" (104.8 mm)
Strength:
- Static - 1,500 lbs.
- Dynamic - 70 ft-lbs.
Handing: Non-handed
Frame Application: For hollow metal, concrete-filled metal, aluminum, and wood doors.
Operating Mode:
- Fail Secure: In the event of a power outage the door stays locked. (Power is applied to unlock the door.)
- Fail Safe: In the event of a power outage the door gets unlocked. (Power is applied to lock the door.)
The 7000C Electric Strike Series ship configured for fail secure operation. See our Installation Instructions with steps provided on how to convert to fail safe operation, if desired.
Electrical (DC Continuous Duty):
- Dual voltage 12/24 VDC
- 450 mA at 12 VDC/250 mA at 24 VDC
Features:
- Tamper-resistant
- Internally mounted solenoid
- Plug-in connector
- Endurance - 1 million cycles
- Preload Release - Door preload occurs when pressure is exerted onto a door and gets transferred to the keeper of the electric strike by the latch. The additional loads can hinder the smooth unlocking of the strike or even disable it - preventing the door from opening. In fail secure mode, the 7000C electric strike's preload release function enables it to work properly under preload conditions with pressure up to 15 lbs.
- In-frame horizontal adjustment - allows the installer to easily adjust the electric strike opening to accommodate the horizontal position of the latchbolt after installation.
- Pocket adapter (786S and 789S options)
Optional Feature: Select from the dropdown above.
LBM - Latchbolt monitor - An internally mounted signal switch that monitors the position of the latchbolt.
Certification: This strike surpasses ANSI/BHMA Grade 1 and ANSI/BHMA A156.31 Grade 2 (783S, 786S & 789S options) requirements for a high level of quality and security.
Installation: For details on how to install the HES 7000C electric strike, see our Installation Instructions.
Operation: Upon receiving an electrical signal, the electric strike releases its hold on the latch which enables the door to be opened from the outside without the need to operate the doorknob. Electric strikes are used in conjunction with mechanical locksets and a card reader, keypad or button to provide additional security, traffic control and convenience of remote operation.
Additional Accessories: The optional accessories below may be ordered. For details and pricing please contact us or call our office at 845-388-1300.
- SMB Surface mounting box (783S and 789S options)
- 7000-104 Lip extension trim adapter
- 7000-105 Trim enhancer (goof plate)
- 7000-106 Keeper pocket adapter
- 7000-107 Full keeper shim pack
- 7000-108 1/8" spacer plate (783S and 789S options, black finish only)
- 7000-110 Replacement strike plate (791 and 792 option)
- 150 Strike latch guard
- HESCUT-MTK Metal template kit
- 2001M Plug-in bridge rectifier
- 2004M ElectroLynx® adapter
- 2005M3 SMART Pac® III
- 2006M Plug-in buzzer
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See Product Specs for exact measurements.
This product has a 5 year warranty against defects in materials and workmanship.
Click here to view our Full Warranty Policy.
Click here to view our HES 7000 Electric Strike, Preload Solution For Cylindrical Latchbolts up to a 5/8" Throw and Rim Exit Latchbolts up to a 3/4" Throw.
Click to Print - HES 7000C Installation Instructions
Click to Print - HES 7000C Compatibility Chart
Click to Print - HES 7000C Cross Reference Chart
ANSI/BHMA A156.31, Grade 1 (791 & 792 options)
ANSI/BHMA A156.31, Grade 2 (783S, 786S & 789S options)
UL 1034 burglary-resistant listed
UL 294 (6th Edition) listed