HES-Folger Adam 712-75 Electric Strike, Fire-Rated, For Hollow Metal Frame Applications with a 1/2" to 3/4" Latchbolt Throw

Electric strikes are electromechanical door keepers that act as a powerful security by holding the lockbolt in place. This HES-Folger Adam 712-75 electric strike works with all brands of cylindrical and mortise locksets with a 1/2" to 3/4" latchbolt throw in hollow metal frame applications.

Parts Included:

• Electric strike body & faceplate
• #12-24 x 1/2" Faceplate mounting screws
• #8-32 Body mounting screws 
• #12 x 2 1/2” Wood faceplate mounting screws 
• Plug-in connector 

Available Finish: Available in a choice of finishes, choose from the dropdown above.

Material: Constructed entirely of stainless steel for strength and corrosion resistance.

Strike Body Depth: 1-7/8" (47.6 mm)

Keeper Depth: 3/4" (19 mm)

Height: 4-7/8" (123.8 mm)

Distance between Mounting Holes: 4-1/8" (104.8 mm)

Strength: 

• Static - 1,500 lbs.
• Dynamic - 70 ft-lbs.

Handing: Non-handed

Frame Application: For single and double hollow metal doors.

Operating Mode: Select from the dropdown above.

• Fail Secure: In the event of a power outage the door stays locked. (Power is applied to unlock the door.)
• Fail Safe: In the event of a power outage the door gets unlocked. (Power is applied to lock the door.)

Please note: Operation in fail safe mode removes the fire-rating of the electric strike.

Electrical (DC Continuous Duty):

• 290 mA at 12 VDC/150 mA at 24 VDC
• PoE friendly

Features:

• Tamper-resistant, heavy duty construction 
• Fire rated - Rated by numerous safety, quality and fire safety standards; falls within the guidelines for retrofit into fire-rated frames.
• Horizontally adjustable keeper - allows for door and frame misalignment 

Optional Feature: Latchbolt and locking cam monitor feature available, choose from the dropdown above. Switch is actuated by the main device (such as a circuit breaker) for signaling, interlocking, or other purposes.

Please Note: When using the latchbolt and locking cam monitor feature with a 1/2" (12.7 mm) or 5/8" (15.9 mm) keeper latchbolt, detection may be dependent on the door gap.

Certification: This strike surpasses BHMA/ANSI Grade 1 requirements for a high level of quality and security.

Installation: For details on how to install the HES-Folger Adam 712-75 electric strike, see our Installation Instructions.

Please note: The HES-Folger Adam 712-75 will require relocation of the center line when used with moritse locks. Please contact us or call our office at 845-388-1300 regarding use with the Best 40 series.

Operation: Upon receiving an electrical signal, the electric strike releases its hold on the latch which enables the door to be opened from the outside without the need to operate the doorknob. Electric strikes are used in conjunction with mechanical locksets and a card reader, keypad or button to provide additional security, traffic control and convenience of remote operation.

Additional Accessories: The optional accessories below may be ordered. For details and pricing please contact us or call our office at 845-388-1300. 

• 150 Strike latch guard
• 152 Universal mounting tabs  
• 2001-1 Wire-in bridge rectifier
• 2001M Plug-in bridge rectifier
• 2004M ElectroLynx® adapter
• 2005M3 SMART Pac® III
• 2006M Plug-in buzzer

Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See Product Specs for exact measurements.

This product has a 5 year warranty against defects in materials and workmanship.
 Click here to view our Full Warranty Policy.

Click here to view our HES-Folger Adam 712 Electric Strike, Fire-Rated, For Hollow Metal Frame Applications with a 1/2" to 5/8" Latchbolt Throw.