Pemko #153 Bumper Threshold, 5.625" Aluminum for Prehung Outswing Door with Seals
This product has been discontinued to view a similar product please see all of our Bumper Thresholds.
This Bumper Threshold is specifically designed for an Outswing Prehung Door Application, however it can be used for Standard Outswing Doors, too. This product is made from high quality materials which will ensure great performance through much usage. Key features of this product includes:
Seals: A rubber gasket is applied along the length of the threshold which compresses to create an airtight seal when the door is closed. This extra protection prevents infiltration of water, drafts, dust, moisture and sound. Sealing the bottom of your door results in an insulated environment which leads to less energy wastes and can lower your energy usage. A choice of thermo or vinyl is available for purchase.
Thermo vs. Vinyl Seal: The thermo seal is a higher grade rubber than its vinyl counterpart and has a greater acoustic performance rating which creates a stronger soundproof seal. It has better performance than vinyl in extreme cold or hot temperature, and is recommended for locations with extreme weather. The vinyl seal wears quicker than thermo, so for best performance, apply vinyl in areas with light traffic abuse.
Sill Protection: This threshold is designed to be applied to a door sill, which provides protection to your sill and lengthens the life of it. It has a total width of 5.625", please review product specs to ensure compatibility.
Design: Threshold is designed for an outswing door, specifically for exterior doors. It can be used in prehung door applications or standard doors. Drilling pattern varies, depending on the application required, please specify in options above, see Drilling Options Tab for more details. *Note, when applying, a 3/8" door clearance is required.
Saddle: The saddle of the threshold is made of high quality aluminum which will not buckle, even through frequent usage. It has width of 5.625" and is beveled at 4°. Available in various finishes to coordinate with door color.
Compliance: Threshold and seal are rated for fire and air infiltration
- Thermo and Vinyl Seal Options
- For Outswing Doors
- Compatible with Prehung or Standard Applications
- High Quality Aluminum Base
- 5/8" Door Clearance Required
- Fire and Air Infiltration Rated
- Length is Custom Cut to Size
Installation Guide and screws provided. Screws are colored to coordinate with threshold color. Drilling pattern varies depending on application, please select from options above.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click to view our Full Warranty Policy.
For another threshold designed for Prehung Applications, view our Bumper Threshold for Pre-Hung Outswing Door.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN153T, 153V
-
Seal TypeThermo Seal, Vinyl Seal
- Dimensions
-
Overall Width5.625" Width
-
Threshold LengthCustom Cut to Size
-
Required Door Clearance.625" Height
-
- Product Design
-
Flat Saddle DesignFluted (Grooved) Design
-
Threshold TypeRubber Seal / Bumper Threshold, For Pre-Hung Doors
-
Seal TypeThermo Seal, Vinyl Seal
-
MaterialAluminum
-
- Installation
-
Drilling HolesDrilling holes provided
-
FastenersFasteners Provided
-
- Finishes
-
FinishMill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313)
-
- Compliance Details
-
Warranty3 Year Limited Warranty
-
Click to View Ratings Explained
- Aluminum Mill Finish - US27 / 719
- Dark Bronze Anodized Aluminum - US10B / 710
- Bright Dip Gold Anodized Aluminum - US3 / 707
- Gold Anodized Aluminum - US4 / 688
- Satin Nickel Anodized Aluminum - US15 / 619
This product can be purchased with the following Drilling Options:
- No Drilling
- Standard Center Line Drilling - Threshold is supplied with 3 screw holes along the center line.
- Drilling for Prehung Applications - Threshold is supplied with 2 nail holes at each end and 1 center screw hole.
Preparation for Prehung Application - Rabbet the door stop to the angle and height of threshold. Nail threshold to underside of stop, see image below for visual presentation.