Zero #671 Expansion Joint Cover Plate System, Surface-Mounted
This Zero #671 four part, surface-mounted, expansion joint cover plate system is comprised of two end pieces, an aluminum grooved plate, and a neoprene grooved plate. This custom size threshold system permits changes in adjacent floor surfaces due to seasonal temperature changes, thereby preventing floor warping. The center aluminum plate is available in many sizes to accommodate thresholds varying in width, starting from 6” wide, and a maximum of 13” wide. The notched underside of the plate permits easy, no welding required, installation. Custom cut to size.
SOLD BY THE FOOT
How to order: Measure the total width of the area you would like to cover (see product specs). Subtract 3.00” (the combined widths of the two end pieces and the neoprene plate) from the total area width. This total indicates the size metal plate required. Choose that amount from the “Plate Width” drop-down box directly below.
This four-part, custom-width, surface-mounted, expansion joint cover plate system is comprised of two end pieces, an aluminum grooved plate, and a neoprene grooved plate. This cover plate system is designed be applied surface-mounted, and is .375” high.
Included in this series: (Individual product measurements can be viewed under the individual specs tab.)
Adjustable Width Threshold Rest, 1”(W)- Z268
Threshold Stop, Aluminum, 3” (W)- Z663
Adjustable Threshold Plate- Available in widths of 3”, 4”, 5”, 6”, 8”, 10” - Z673-6710
Traction Tread Expansion Joint Cover, Neoprene- Z84
Expansion joints are the gaps left between two flooring areas to prevent warping of floor materials resulting from the expansion and contracting of certain types of flooring due to seasonal temperature changes. When a threshold is screwed in place above it to conceal the gap, the yielding neoprene plate supplies the flexibility needed to allow for possible floor changes, unlike a solid metal plate (see product specs).
The first threshold in this series is designed with a rest that is notched to easily interlock with the accompanying metal plate for an easy, no welding required, installation (see individual specs). It is made of high quality .094" thick metal. The second, end piece threshold has a sturdy, 2.00” smooth, extending saddle upon which the plates are placed, first the neoprene plate and followed by the aluminum plate (see product specs). It is made of .125" thick aluminum, ensuring it won't buckle under heavy usage. Both thresholds measure .375" high and each contribute 1.00” to the total threshold width (see product specs). For additional support, the option of full body strength filler is available.
The sturdy, center aluminum plate is grooved to prevent slipping, and for additional traction safety, epoxy abrasives can be bonded to the plate grooves. The plate measures .250” in height and is available in many width sizes ( 3”, 4”, 5”, 6”, 8”, 10) to accommodate thresholds of greater widths (see individual product specs). When placed on the threshold saddle, total plate height is .375” (see product specs).
The rubber plate is made of high quality neoprene, and is also grooved to prevent slipping. Neoprene exhibits a range of useful properties, including good resistance to water, cold, heat, and tolerance for moderate chemicals, acids, oils, and solvents. It measures 1.00” wide and .250” in height (see individual product specs). When placed on the threshold saddle, the total height is .375” (see product specs). For easy installation, the neoprene plate is held in place with a self-ahesive PSA backing. This plate can also serve as a thermal break between the metal threshold and the metal plate. Length is custom cut to size.
How to order: Measure the total width of the area you would like to cover (see product specs). Subtract 3.00” (the combined widths of the two thresholds and the neoprene plate) from the total area width. This total indicates the size metal plate required. Choose appropriate amount from the “Plate Width” drop- down box above.
- Surface-mounted expansion joint cover plate system, custom-width
- Threshold complies with ANSI Standard Load Test
- Compatible for minimum 6.00” total threshold width
- Threshold measures .375” in height
- Aluminum and Neoprene plate combination contributes yielding capabilities
- Additional options for epoxy abrasives.
- Length is custom cut to size
Installation screws provided. Note, Drilling for aluminum plate is not supplied unless specified and template is provided. Please contact us or call at 845-388-1300 to supply template.
If threshold is being drilled into concrete, Expansion Anchors are recommended.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See the product specs and individual specs tabs for exact product measurements.
Need Help ordering this product? Please contact us or call at 845-388-1300 and our trained staff will assist you.
This product has a 1 year guarantee against defects in material and workmanship. Click here to view our full Warranty Policy.
To view and purchase each of the products in this series individually, choose from the list below:
Zero International #268 Adjustable Width Threshold Rest, 1”(W)
Zero International #663 Threshold Stop, Aluminum, 3” (W)
Zero International #6700 Adjustable Threshold Plate
Zero International #84R Traction Tread Expansion Joint Cover, Neoprene
Check out our Zero International #670 Flush-Mounted Cover Plate System for Expansion Joint
-
QuickShipNo
-
ManufacturerZero International
-
MPN671
-
Plate Width3", 4", 5", 6", 8", 10"
-
OptionsNone, Epoxy Abrasives, Full Body, Both Epoxy and Full Body
- Dimensions
-
Overall Height.375” Height
-
Overall Width6.00” Width
-
Threshold LengthCustom Cut to Size
-
Thickness.125" Thick
-
- Product Design
-
Flat Saddle DesignFluted (Grooved) Design
-
Threshold TypeCover Plate
-
MaterialAluminum
-
- Installation
-
Drilling HolesDrilling holes provided
-
FastenersFasteners Provided
-
- Compliance Details
-
Warranty1 Year Limited Warranty
-
How to order: Measure the total width of the area you would like to cover (see product specs). Subtract 3.00” (the combined widths of the two end pieces and the neoprene plate) from the total area width. This total indicates the size metal plate required. Choose that amount from the “Plate Width” drop-down box directly below.
Note, for illustrative purposes only, For accurate image refer to product specs and detailed images.