Glynn Johnson 410 Series Overhead Door Holder and Stop, Concealed Mount for Light/Medium Duty

Glynn Johnson 410 Series Overhead Door Holder and Stop, Concealed Mount for Light/Medium Duty
Glynn Johnson

Glynn Johnson 410 Series Concealed Door Holders and Stops provide the industry's widest variety of functions, base materials and finishes  for medium to light duty applications. The 410 Series holders provide effective door control and a low-profile design. 

Available with an option of hold-open, friction hold-open, internal hold-open and stop only functions and a wide array of finishes.

PRICED PER PIECE

See tabs below for additional information
    • SKU
      GJ411H_US3
    • Market price:$208.00
      • save 10%
    • Starting price: Price: $187.20 per item
     

    Glynn Johnson 410 Series Concealed Door Holders and Stops provide the industry's widest variety of functions, base materials and finishes  for medium to light duty applications. The 410 Series holders provide effective door control and a low-profile design.

    Materials and Finishes: Available in 300 series, brass and steel substrates, these models offer the broadest range of finishes in the industry complementing any design and offering the highest resistance to corrosion.  Available in the following finishes: US3, US4, US10, US10B, US32, US32D, SP4, SP10, SP28, SP313, SPBLK, 652.

    Applications: Designed for medium to light-duty applications and can be used on almost all type of doors in conjunction with most surface-applied door closers . Ideal for openings that are subject to normal activity, providing protection for the door, frame, hinges and surrounding walls or obstructions. All models incorporate the popular channel/slide-arm design and offset jamb brackets.  This improved design allows for simple field modification of functions, should user requirements change.

    For exterior doors subject to wind or doors/frames that are subject to heavy, frequent use, a heavy-duty holder or stop should be considered. See our Glynn Johnson 100 Series Heavy Duty Overhead Door Holders and Stops.

    Function: Hold Open models: Provide a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow. Hold open tension can be adjusted using an Allen wrench through the end of the slider located in the channel mounted in the top of the door. Automatic Hold-Open mechanism is activated when the door is opened to a preset angle. Hold-Open feature is not selectable, so the door is always held open.

    Stop-Only models: Provides a reliable method of door control when the hold-open function is not a requirement.  Provides shock-absorbing capability and may be used on fire doors.

    Friction Hold-Open models: Can be adjusted on the top of the slider in the channel using an Allen and open end wrench. Ideal for patient room doors, wardrobe, closet doors or similar applications where multiple Hold-Open positions are desired.

    Classification: Stop only models are UL listed as miscellaneous fire door accessories. May be used on hollow metal fire doors or wood fire doors of any rating without adversely affecting the fire rating on the fire door and/or fire door frame.  Where wood door manufacturer's listing allows for the cutout required for installation, concealed overhead stops may be used on those wood fire doors.  These units may be used on doors of any rating.

    Installation: Product is provided with templates to allow for variable mounting positions, ranging from 85 degrees to 110 degrees hold-open/stop angle. Templates are designed for installation in almost all types of doors. See Installation Tab for complete installation instructions.

    Additional Options: Including pin-in socket security screw and special stop only models can be ordered. Please contact us or call our office at 845-388-1300.

    This product has a 1 year guarantee against defects in workmanship and materials.

    Click here to view our Full Warranty Policy.

    Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail.

      • SKU
        GJ411H_US3
    • Material
      Brass, Steel
    • Strength
      Standard / Medium Duty
    • Size
      1 (18" - 23"), 2 (23 1/16" - 27"), 3 (27 1/16" - 33"), 4 (33 1/16" - 39"), 5 (39 1/16" - 45")
    • Function
      Hold-Open, Stop- Only, Friction Hold- Open
    • Mounting
      Concealed Mount
    • QuickShip
      No
    • Manufacturer
      Glynn Johnson
    • MPN
      G410
    • Finishes
      • Finish
        Polished Brass (US3), Satin Brass (US4), Satin Bronze (US10), Oil-Rubbed Bronze (US10B), Polished Stainless Steel (US32), Satin Stainless Steel (US32D), Powder Coat Brass (SP4), Powder Coat Bronze (SP10), Powder Coat Black (SPBLK), Chrome Like Coating (652)
    • Compliance Details
      • Compliance Details
        BHMA Certified
      • ANSI Designation
        C04511, C04541, C04531
      • Warranty
        1 Year Limited Warranty

    Printable Documents:

    Click to print Glynn Johnson 410 Series Concealed Overhead Door Holder Product Specs.

    Sample Applications:

    Glynn Johnson 410 Series Overhead Door Holder Sample Applications

    Sizing Options:
    Glynn Johnson 410 Series Overhead Door Holder Size Options

    Certifications:
    Glynn Johnson 410 Series Overhead Door Holder Certifications

     

     

    Printable Documents:

    Click to print Installation Instructions for Glynn Johnson 410 Series Overhead Door Holders.

    Notes:

    A. Hollow metal frames should be properly reinforced with a 3/16" (5) minimum thickness by 12" (305) minimum length plate.
    B. Hollow metal doors should be properly reinforced with a 3/16" (5)minimum thickness plate.
    C. Stop only units are permitted on many fire door applications. However, mechanical hold-open devices that require manual release are not permitted for use on any fire door as outlined on NFPA80 or NFPA101. Contact Glynn-Johnson or your local representative for assistance.
    D. Dead stop (DS) templating may be used on hold open, friction and stop only models. But should not be used on "SE" models. The DS position is reached when the shock spring is fully compressed. When DS templating is used, the initial degree of stop will be 5"-7" is than the DS opening. For use on doors opening back to back, against a wall or obstruction.

    Adjustments:

    Hold-Open tension adjustment (Hold-Open unit only)- using a 5/32" ball end allen wrench, turn screw inside "long" end of the cam clockwise to decrease hold-open tension and counterclockwise to increase hold-open tension. Tension set to minimum at factory.

    Friction tension adjustment (Friction Unit only) - using a 3/32" allen wrench, turn screw shown clockwise to increase the friction tension an turn counterclockwise to decrease the friction tension.

    Installation:

    Overhead holders or stops must be installed before closers:

    1. A. Determine the mounting being used from illustration below.
        B. Select mounting group number from the chart below. Most continuous hinges are grouped with 4 1/2" wide butt or 4 1/2" swing clear hinge.
        C. Using the mounting group number and the overhead holder or stop size and the degree of opening desired. Find "A", "B", "C", "D" and "E" dimensions from chart on page 3 thru 6. For dead stop add 9/16" (14) to the "A" dimension from the chart. See Note D for information about dead stop.

    2. A. Locate "B" dimension on the frame. Note that the "B" dimension is measured from the centerline of the hinge as shown.
        B. Mortise for the jamb bracket as shown. Refer to left and right hand plan views for appropriate hole pattern.
        C. For metal frames, use a #21 drill and a 10-32 tap in 4 places. For wood frames, drill a 1/16" pilot hole in 4 places.

    Refer to illustration below and on sheet 1 for the following notes:

    3A. Locate "A" and "D" dimensions on the centerline of the door. Note that the "A" dimension is measured from the centerline of the hinges as shown.
      B. Mortise for the channel as shown if required.
      C. Locate "C" and "E" dimensions on  the top of the door. Note that the "C" dimension is measured from the centerline of the hinge as shown.
      D. Mortise for arm cutout as shown.
      E. For metal doors, use a #21 drill and 10-32 tap in 2 places. For wood doors, drill 1/8" pilot holes in 2 places. Mounting holes should be prepared in the field.

    4. A. Install the channel in the door with the shock spring towards the hinge edge of the door.
        B. Install jamb bracket in frame. Dimensions in () are millimeters. 

     

    • General Ship Time:
      • Items are custom made to order and require a lead time of 2 weeks.
      • Expedite options are available, please call our office for assistance.
      • Ships via major carriers, such as UPS or FedEx Ground, with tracking information provided.
         
    • Domestic Shipping Fees- (Hawaii and Alaska not Included):
      • FREE SHIPPING on orders over $200.00 (excludes oversized and freight orders).
      • There will be a flat $19.99 shipping and handling fee on orders under $200.00.
      • Oversized Items: Items 86" and above have an oversize surcharge of $70.00
      • Freight Orders: Items 95" and above require freight shipment and have a shipping charge of $150.00
      • Orders totals above $1,500.00 will ship free, regardless of size.
         
    • Alaska and Hawaii, Canada, and International Shipping:
    • Returns:
      • Stock Items can be returned with a 30% Restock fee. Items must be in new, resaleable condition.
      • All other items are custom made to order and are not returnable.
      • We are commited to your satisfaction. As a courtesy, we may, at our discretion accept returns with a minimum 30% restock fee.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
      • Return shipping is customer's responsibility. A return address will be provided with RMA#.
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.

    SHIPPING / PROCESSING TIME:

    This product ships directly from the manufacturer. 
    Zero is experiencing Significant Delays. If you are in a rush please call us for alternative options.



    • Domestic Shipping Fees- (Hawaii and Alaska not Included):
      • FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders). 
      • There will be a flat $19.99 shipping and handling fee on orders under $300.00.
      • Oversize: Orders containing items sized 50" - 95" have an oversize surcharge of $49.99.
      • Freight Items: Orders containing items sized 96" - 108" have an oversize surcharge of $199.99.
      • Oversize Freight Items: Orders containing items sized 109" and above have an oversize surcharge of $299.99.
      • Orders totals above $2,000.00 will ship free, regardless of size.
         
    • Alaska and Hawaii, Canada, and International Shipping:
    • Returns:
      • This product is custom made and is not returnable.
      • We are committed to your satisfaction, as a courtesy, we may, at our discretion accept returns with a minimum 30% restock fee.
      • CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within Seven (7) days of receipt of goods.
      • Weatherstripping products will not be considered for returns.
      • Item must be in new, re-saleable condition.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
      • Return shipping is customer's responsibility. A return address will be provided with RMA#.
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
    Related products
    Customers who bought this product also bought