Pemko #254 Half Threshold, 4" (W) Aluminum or Bronze, .5" (H)
A half threshold is a simple way to correct a floor offset between rooms and eliminate the tripping hazard associated with differences in floor surface heights. This half threshold is ADA Compliant and fills offsets of .5" and has a 4" width. Available in aluminum, bronze and anodized variations and is custom cut to size.
PRICED PER FOOT.
Half Thresholds corrects offsets in floors and removes the tripping hazards associated with changes in floor surface heights.
Length: Custom cut to size up to 104" (Larger sizes can be purchased through our office)
Finish: Three aluminum variations and bronze mill finish (Oil rubbed bronze can also be purchased for an additional 40% of standard bronze finish).
A Note on Finishes: Aluminum Mill Finish is plain smooth metal as it comes from the mill, without a coating. Bronze is a mill finish, sometimes referred to as Architectural Bronze. It is a solid bronze piece, which increases longevity and aesthetics, thus the large difference in price. It gets darker in color in time when exposed to the environment. Anodizing is an electrolytic process that applies a corrosion-resistant coating to the aluminum for longer wear and color maintenance.
Installation: Installation instructions and screws provided. Screws are colored to coordinate with door hardware. If threshold is being drilled into concrete, an Expansion Anchor is recommended.
Drilling: Threshold is drilled along the center line for easy installation
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our full Warranty Policy.
For heavy duty option, see our 4" Extra Heavy Duty Aluminum or Bronze, .5" Height
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN254
- Dimensions
-
Overall Height.5" Height
-
Overall Width4" Width
-
Threshold LengthCustom Cut to Size
-
Required Door Clearance.625" Height
-
- Product Design
-
Flat Saddle DesignFluted (Grooved) Design
-
Threshold TypeHalf Threshold
-
MaterialAluminum, Brass
-
- Installation
-
Drilling HolesDrilled along the center line
-
FastenersFasteners Provided
-
- Finishes
-
FinishMill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313), Bronze Mill Finish (Brass)
-
- Compliance Details
-
Compliance DetailsFire Rated, ADA Compliant, BHMA Certified
-
Warranty5 Year Limited Warranty
-