Markar FM300 Stainless Steel Hinge, Concealed Leaf

Markar FM300 Stainless Steel Hinge, Concealed Leaf
Markar

Markar FM300 is a Heavy-Duty Concealed Leaf Continuous Hinge which is mortised to the frame rabbet and edge of the door to conceal both leaves.  This hinge is designed for door weighing up to 600 lbs. and a maximum width of 4'0". Hinge is Satin Stainless Steel and available in standard stock sizes, see below for details and pricing.

PRICED PER PIECE

See tabs below for additional information
    • SKU
      MRFM300_79
    • Market price:$634.00
      • save 25%
    • Starting price: Price: $475.50 per item
     

    Marker FM300 is a Pin and Barrel Type Continuous Stainless Steel Concealed Leaf Hinge.

    • Standard Sizes: 6'8", 7'0", 7'2", 8'0", 10'0". Custom sizing available, contact us or call at 845-388-1300 for details and pricing. 
    • Applications:  Supports weights up to 600 lbs. 4'0" maximum door width. Non-handed. Extra heavy duty for high traffic, high abuse door applications, including correctional facilities, high security locations and extra heavy doors. This hinge saves on special door and frame preparation charges and makes the installers job easier.
    • Design: Constructed from 14 gauge stainless steel (US32D).187" diameter 304 stainless steel pin (rod) with stainless steel end pins and medical bearings. Exterior barrel diameter .438" (7/16"). Each knuckle 2", including split nylon bearing at each separation for a quiet, smooth, self-lubricating operation. Fasteners concealed when door is closed. 
    • Finish: US32D Satin Stainless Steel (630).  Custom finishes are available, contact us or call at 845-388-1300 for details and pricing. 
    • Mounting Hardware: Custom 12-24 x 11/16" S.S. Phillips Flat Head Undercut TEK Screws.
    • Handing: Not required on standard hinges. Specify handing when ordering a hinge with modification.
    • Certifications: Fire-Rating: 3 hours on hollow metal doors. 90 minutes- hollow metal and composite. 20 minutes- wood door.
                            Classified in accordance with UL10C for positive pressure.
                            Evaluated in accordance with TAS 201-94, TAS 202-94, TAS 203-94, ASTM E330, ASTM E1886, ASTM E1996 and ANSI A250.13.
                            ANSI/BHMA Standard A156.26 Grade 1.
                            Note: Fire label for doors and frames should be placed on the header and top rail of fire rated doors and frames.
    • Modifications and Options: Adjustable monitoring switch, hospital tip hinges, medical bearings, dutch door hinge preparation, custom hole patterns, special sheared leaf, wide throw hinges, raised barrel(Swage), edge guard hardware cut-outs, special length hinges, Electrical Modification Access Prep, CTP-Current Transfer Preparation, CE - Current Transfer-Concealed, CT- Current Transfer- Contact Switch, ES-Exposed Monitoring Switch, blank hinges (minus hole pattern), lead lined cover (1/16" LEAD), security fasteners are available through our office. For details and pricing please contact us or call 845-388-1300.
    • Priced per Piece
    • Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

    Click to view our Markar FS301 Full Surface Pin and Barrel Hinge.

     This product has a 25 year warranty against defects in workmanship and material. 

    Click here to view our Full Warranty Policy.

      • SKU
        MRFM300_79
    • QuickShip
      Yes
    • Manufacturer
      Markar
    • MPN
      MFM300

    Printable Documents:

     Click to print Markar FM300 Pin and Barrel Hinge Product Specs.

    Product Specs:
    Markar FM300 Pin and Barrel Hinge Product Specs  Markar FM300 Pin and Barrel Hinge Product Specs

    Certifications:
    Markar Continuous Hinge Certifications

     

    Click to print Installation Instructions for Markar FM300 Pin and Barrel Edge Mount Hinge.

    Step 1: Frame Preparation:

    1. Place the hinge frame leaf on the frame. Position the top of the hinge 1/8" maximum below the header as shown (see attachment Fig. 1). Place the hinge firmly against the rabbet of the frame.

    2. Mark and center punch each hole on the frame with the hinge held firmly in place. For ease of installation, a center punch can help center the hole so that the fasteners will enter straight. Remove the hinge from the frame and prepare to drill the frame.

    3. Drill holes: Wood frame- drill all holes using a #28 or 9/64" drill bit. Hollow Metal frame- drill all holes using a #16 drill bit. If hollow metal frame is reinforced, thread all holes with 12-24 tap.

    Do not install the hinge to the frame at this time.

    Step 2: Door Preparation

    1. Position the hinge door leaf so that the top of the hinge is flush with the top of the door. Next make sure the hinge edge is up flush with the door face.

    2. Mark and center punch each hole on the door with the hinge held firmly in place (Fig.2). Remove the hinge from the door and prepare to drill the door.

    3. Drill holes: Wood Doors- drill all holes using a #28 or 9/64" drill bit. Hollow Metal Doors: Drill all holes using a #16 drill bit. If hollow metal door is reinforced, thread all holes with 12-24 tap.

    Step 3: Hinge Installation

    1. Attaching hinge to door (Fig.3)

    Wood: Attach hinge using 12-8 x 1 1/2" Flat Head Particle Board Screws (PBS12150SP10SS).

    Hollow Metal: Attach hinge using #12-24 x 11/16" Flat Head Undercut Self Drilling Machine Screws (TKS1267SP10SS).

    2. Attaching hinge to frame (Fig. 4)

    Wood: Attach hinge using 12-8 x 1 1/2" Flat Head Particle Board Screws (PBS12150SP10SS).

    Hollow Metal: Attach hinge using #12-24 x 11/16" Flat Head Undercut Self Drilling Machine Screws (TKS1267SP10SS).

     


    SHIPPING / PROCESSING TIME:

    This product ships directly from the manufacturer. 
    Most items are in stock and ship  and will ship within 1 - 3 business days


    IMPORTANT NOTE: QuickShip applies to selections that show the QuickShip icon (near the price). Factory lead times will apply to selections that do not show the QuickShip icon.

    • Domestic Shipping Fees- (Hawaii and Alaska not Included): 
      • FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders).  
      • There will be a flat $19.99 shipping and handling fee on orders under $300.00.
      • Oversize: Orders containing items sized 50" - 95" have an oversize surcharge of $49.99.
      • Freight Items: Orders containing items sized 96" - 108" have an oversize surcharge of $199.99.
      • Oversize Freight Items: Orders containing items sized 109" and above have an oversize surcharge of $299.99.
      • Order totals above $2,000 will ship free, regardless of size.
         
    • Alaska and Hawaii, Canada, and International Shipping: 
    • Returns: 
      • This products can be returned up to 30 days from date of purchase. 
      • Item must be in new, resaleable condition. No restock fee will be applied. 
      • CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within Seven (7) days of receipt of goods.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number. 
      • Return shipping is customer's responsibility. A return address will be provided with RMA#. 
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.