Home > Hinges > Continuous Hinges > Markar Barrel and Pin Hinges > Markar MP606 Brushed Cover Clip

Markar MP606 Brushed Cover Clip

Markar MP606 Brushed Cover Clip
Markar MP606 Brushed Cover Clip Markar MP606 Brushed Cover Clips Markar MP606 Brushed Cover Clips Application
0.0

Markar MP606 cover clip for attaching MP506 security covers for Markar 200 and 300 series continuous hinges. Aluminum cover caps with a brushed finish. 

SOLD PER PACKAGE: 20 CLIPS PER PACKAGE 

Price: $14.64
Qty
Save to wishlist
Note: you must order at least 3 items
SKU MMP606
Shipping See Shipping Tab Below
Description

Markar MP606 cover clip with Brushed Aluminum Finish.

  • Application: Used in conjunction with MP506 Snap On Covers used on Markar 200 and 300 series continuous hinges.
     
  • Finish: Brushed Aluminum Finish.
     
  • Installation: Install at least five cover clips per continuous hinge leaf. Install a screw through the clip, hinge leaf and door. Clips should be positioned in the top, center and bottom holes with remaining clips spaced equally along length of hinge.
     
  • Priced per package; 20 clips per package.
     
  • Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail.

This product has a 5 year warranty against defects in workmanship and material. 

Click here to view our Full Warranty Policy.

 

Installation

Begin these instructions after completing installation of the continuous hinge on the door.

1. Install at least five cover clips by passing a screw through the clip, hinge leaf and door.

 We recommend that clips be positioned in the top, center and bottom holes, with the remaining clips spaced equally along the length of the hinge.

 When installation of the clip is complete, install the Snap-On cover.

2. Engage the side of the cover next to the hinge pin first.

3. Insert a large screwdriver between the hinge knuckle and the cover. Using the screwdriver as a lever, twist it and snap the opposite side of the cover onto the clip.

4. Start at the top and work downward until the entire length of the cover is firmly engaged.

5. With the cover firmly in place, secure it at both ends through the hinge and into the door with #8 x 3/4" self drilling flat head Tek screws. 

Shipping / Returns
  • Ship Time:
    • This product is made to order. Please allow 2-3 weeks to ship.
    • Expedited shipping is available. Please contact our office for assitance.
    • Ships via major carriers, such as UPS or FedEx Ground, with tracking information provided.
       
  • Domestic Shipping Fees- (Hawaii and Alaska not Included):
    • FREE SHIPPING on orders over $200.00 (excludes oversized and freight orders).
    • There will be a flat $19.99 shipping and handling fee on orders under $200.00.
    • Oversized Items: Items 86" and above have an oversize surcharge of $70.00
    • Freight Orders: Items 95" and above require freight shipment and have a shipping charge of $150.00
    • Orders totals above $1,500.00 will ship free, regardless of size.
       
  • Alaska and Hawaii, Canada, and International Shipping:
  • Returns:
    • This items is custom made and non-returnable.
    • As a courtesy, we may accept returns at our discretion, with a minimum 25% restock fee.
    • Item must be in new, resaleable condition. A 20% restock fee will be applied.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
    • Return shipping is customer's responsibility. A return address will be provided with RMA#.
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Reviews
Product reviews are only available to verified buyers of this product. To leave a review, please refer to the product review email we sent you.

Not yet rated. Be the first to Write a Review

Recently Viewed