Pemko #2052 Half Threshold, 3.625" (W) Aluminum for Residential Application, .625” (H)
A half threshold is used to correct a floor offset between rooms and to eliminate the tripping hazard associated with differences in floor surface heights. This residential half threshold fills offsets of .625". It is fire rated, and is available in aluminum mill finish or dark bronze anodized.
SOLD IN STOCK SIZES OF 36" AND 72"
Half Thresholds corrects offsets in floors and removes the tripping hazards associated with changes in floor surface heights. Residential model is designed for application with low to medium foot traffic.
Width: 3.625"
Height: .625"
Length: 36" or 72"
Finishes: Available in aluminum mill finish and dark bronze anodized
Compliance Details: Fire Rated, UL Listed
Installation: Installation instructions and screws provided. Screws are colored to coordinate with saddle. Be sure to caulk all support legs or lay in mastic for best seal. If threshold is being drilled into concrete, an Expansion Anchor is recommended.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN2052
-
Length(Inches)36" Length, 72" Length
- Dimensions
-
Overall Height.625" Height
-
Overall Width3.625" Width
-
Threshold Length36" Length, 72" Length
-
- Product Design
-
Flat Saddle DesignSmooth Top Design
-
Threshold TypeHalf Threshold
-
MaterialAluminum
-
- Installation
-
Drilling HolesDrilling holes provided
-
FastenersFasteners Provided
-
- Finishes
-
FinishMill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313)
-
- Compliance Details
-
Warranty5 Year Limited Warranty
-
Click to View Ratings Explained
- Aluminum Mill Finish - US27 / 719
- Dark Bronze Anodized Aluminum - US10B / 710