Accentra SDA16 Door Exit Alarm, Stand Alone Unit, Battery Operated, Less Cylinder - Quick Ship
The SDA16 door alarm is made to continuously check on the condition of a door. An alarm is activated to notify of the security breach when the door is opened without permission. This alarm has a Peizo horn that emits a loud 105+ decibel blast to notify the violator. This door alarm is normally positioned on the inside of the door frame or door and is linked with a magnet mounted on the opposite side of the door gap.
PRICED PER SET
The SDA16 door alarm is made to continuously check on the condition of a door. An alarm is activated to notify of the security breach when the door is opened without permission. This alarm has a Peizo horn that emits a loud 105+ decibel blast to notify the violator. This door alarm is normally positioned on the inside of the door frame or door and is linked with a magnet mounted on the opposite side of the door gap.
Function: Stand Alone Exit Alarm
Specification:
- Dimensions: 8.3″ L x 3.1″ W x 2.0″D
- Finish: Gray
- Power Requirements: 9-Volt Alkaline battery (Included).
- Cylinders: Each unit supplied with keyed-alike cam lock to hold cover in place. Mortise cylinder for interior arming/disarming and rim cylinder for exterior arming/disarming (if required) are ordered separately.
Programmable Features
- Adjustable REX and Passage Time Delay for 7, 10, 15, or 20 seconds
- Manual (default) or automatic alarm reset adjustable for 2, 5 or 10 minutes
- Adjustable LED’s colors indicating armed or violated states
Note: This unit can be hardwired by using WH-11 wire harness and 784 power supply. (Contact our office to purchase)
Priced Per Set
Click here to see our Accentra D38 2-3/8″ Backset Deadbolt Assembly for D100/D200 Series - QUICKSHIP