Activar Vision Lite Kit PAK, For 1-3/4" Doors, Complete with 1/4" WireShield / Tempered Glass
This PAK is a vision lite kit complete with a choice of a slimline or beveled frame and a choice of 1/4" thick wireshield or tempered glass (glazing). The frame is a 20 gauge CRS frame with a mineral bronze powder coat finish. The PAK is available in many sizes, choose from the dropdown below.
See full product details and specs in the tabs below.
PRICED PER PIECE
See tabs below for additional information
This vision lite kit comes complete with 1/4" thick glass and applied tape.
Material: 20 gauge CRS frame
Dimensions: Available in common sizes through our site. Additional sizing can be purchased through our office.
- WS PAK: Available widths: 4"-48", Available heights: 4"-96".
- TEMP PAK: Available widths: 2"-88", Available heights: 2"-118".
How to Order: Orders size is the Door Cut-out Dimensions. See VSL Product Specs and VLFEZ Product Specs for details.
Finish: Mineral Bronze powder coat finish
Construction: 1-1/4" trim with mitered and welded corners. Continuous glass retainer, countersunk mounting holes in the bevel on non-corridor side. The VSL frame has radius corners.
Door Type: For 1-3/4" thick doors.
Fasteners Included: #8 x 1" flathead phillips SMS to match finish.
Frame Included: This PAK comes with an choice of frames. Both options are self-attaching frames with single-side fasteners.
- VSL - Slimline, Low Profile Beveled Vision Lite
- VLFEZ - Beveled Vision Lite
Glass Included: This PAK comes with a choice of glazing. Both options are 1/4" thick safety-rated glass.
- WS - Wireshield glazing is annealed single glazing with safety film applied to one side & embedded 3/4" x 3/4" wire mesh. The standard wire pattern is diamond (diagonal) with an option of baroque (horizontal) at an additional cost.
- TEMP - Tempered glazing is heat treated clear safety glass that holds the shape of the glass when it breaks. There is an option of obscure frosted glass or tinted glass at an additional cost.
Compliance Details:
- WS - Fire rated up to 90 minute with hose stream rating. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure.
- TEMP - Not Fire rated, and should not be used where building codes require fire-rated glazing.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See VSL Product Specs and VLFEZ Product Specs for exact measurements.
This product has a 5 year warranty against defects in materials and workmanship.
Click here to view our Full Warranty Policy.
Click here to view our Activar Vision Lite Kit PAK, Complete with 3/16" KeraShield FRF / Pyran Platinum F Glass.
-
QuickShipNo
-
ManufacturerActivar Air Louvers
-
MPNWS / TEMP PAK
-
Size (W" X H")5" W X 35" H, 6" W X 27" H, 7" W X 22" H, 8" W X 18" H, 8" W X 32" H, 8" W X 36" H, 12" W X 12" H, 24" W X 24" H, 24" W X 30" H, 24" W X 32" H, 24" W X 36" H, 24" W X 60" H
-
FrameVSL (Slimline), VLFEZ (Beveled)
-
GlassWS (WireShield), TEMP (Tempered)
Wireshield - Listed and tested with UL Laboratories, a nationally recognized testing laboratory (NRTL) and approved by OSHA.
Tested in accordance with UL 9, UL 10B; NFPA 80, NFPA 252, NFPA 257; ASTM E2074, E152, E163, E2010-01; ULC CAN4-S104 & CAN4-S106.
Listing: Fire Rated up to 90 minute with hose stream rating.
Impact Safety Rating: CPSC 16CFR 1201 (CAT I & II)
Postive Pressure Rating: UL10C/UBC 7-2
Tempered - The tempered glazing that is included in this PAK is not fire rated, and should not be used where building codes require fire-rated glazing.
