Emtek 96213 Brass Heavy Duty, Plain Bearing, 3.5" x 3.5", Square Corner Hinge - PAIR
Emtek #96213 Heavy Duty, Solid Brass, Plain Bearing Hinges will complement your door and ensure a matching finish to other Emtek Hardware. Hinges are sized 3.5" x 3.5", with a square corners and are available in selection of finishes.
PRICED PER PAIR
Emtek #96213 Heavy Duty, Solid Brass, Plain Bearing Hinges will complement your door and ensure a matching finish to other Emtek Hardware.
- Dimensions: 3.5" x 3.5"
- Thickness: 0.132"
- Fasteners: #10 x 1" Wooden Screws provided
- Material: Solid Brass
- Screw Holes: 6
- Priced and Sold in Pairs
- See specification tabs for additional information
About Heavy Duty Plain Bearing Hinges: Plain bearing hinges feature knuckles that move against each other without additional bearings. The Heavy Duty hinges have a thicker leaf than standard residential plain bearing hinges, they are designed for heavier residential use / light commercial use and not recommended for heavy traffic entryways. For heavy traffic, consider a Ball Bearing Hinge.
About the Material: Solid Brass is made of copper and zinc and is popular due to its aesthetics, resilience and durability. It is highly resistant to rusting and is available in a large variety of finishes. However it is significantly more expensive than its steel and stainless steel counterparts.
Installation: This hinge is fully mortised. Three hinges should be used on doors up to 90". Add one additional hinge per each additional 30" of door height.
Corners: This hinge is designed with a square corner, also popular for fully mortised hinges are 1/4" radius and 5/8" radius hinges.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail.
This product has a 5 year warranty on material and workmanship.
Click here to view our Full Warranty Policy.
See also our Emtek 96134 4" x 4" Residential Hinge with 5/8" Radius.
-
QuickShipNo
-
ManufacturerEmtek
-
MPN96213
- Product Design
-
Hinge CategoryFull Mortised Hinge
-
Base MaterialBrass
-
Usage LevelStandard Duty
-
ThrowStandard Throw
-
Bearing TypePlain Bearing
-
Knuckles5 Knuckle Hinge
-
Pin TypeRemoveable Pin
-
Hinge Tip TypeButton Tip
-
Hinge CornerSquare Corner
-
Hole PatternCommercial "C" Pattern
-
Number of Holes6 Holes
-
- Dimensions
-
Hinge Size3-1/2" x 3-1/2"
-
Hinge Thickness0.132" Thick
-
- Installation
-
Door TypeWooden Door
-
Installation Screws#10 x 1” Provided
-
- Finishes
-
FinishPolished Brass (US3), Satin Brass (US4), French Antique (US7), Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL)
-
- Compliance Details
-
Warranty5 Year Limited Warranty
-