Emtek 9822332D Stainless Steel, Plain Bearing, 3.5" x 3.5", 1/4" Radius Corner - PAIR
Emtek #9822332D Residential Duty, Stainless Steel, Plain Bearing Hinges will complement your door and ensure a matching finish to other Emtek Hardware. Hinges are sized 3.5" x 3.5", with 1/4" radius corners and are available in selection of finishes.
PRICED PER PAIR
Emtek #9822332D Residential Duty, Stainless Steel, Plain Bearing Hinges will complement your door and ensure a matching finish to other Emtek Hardware.
- Dimensions: 3.5" x 3.5"
- Thickness: 0.113"- 0.135"
- Fasteners: #12 x 1 1/4" Wooden Screws provided
- Material: Stainless Steel
- Screw Holes: 6
- Priced and Sold in Pairs
- See specification tabs for additional information
About Residential Duty Plain Bearing Hinges: Plain bearing hinges feature knuckles that move against each other without additional bearings. The Heavy Duty hinges have a thicker leaf than standard residential plain bearing hinges, they are designed for heavier residential use / light commercial use and not recommended for heavy traffic entryways. For heavy traffic, consider a Ball Bearing Hinge.
About the Material: Steel is a strong metal that is significantly cheaper than Solid Brass. Its superb strength makes it suitable for heavier doors. However, steel is not as durable as brass, as it will rust over time.
Installation: This hinge is fully mortised. Three hinges should be used on doors up to 90". Add one additional hinge per each additional 30" of door height.
Corners: This hinge is designed with a 1/4" radius corner, also popular for fully mortised hinges are square cornered and 5/8" cornered radius hinges.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail.
This product has a 5 year warranty on material and workmanship.
Click here to view our Full Warranty Policy.
See also our Emtek 9822432 4" x 4" Residential Hinge with 1/4" Radius Corners.
-
QuickShipNo
-
ManufacturerEmtek
-
MPN9821332D
- Product Design
-
Hinge CategoryFull Mortised Hinge
-
Base MaterialStainless Steel
-
Usage LevelMedium Duty
-
ThrowStandard Throw
-
Bearing TypePlain Bearing
-
Knuckles5 Knuckle Hinge
-
Pin TypeRemoveable Pin
-
Hinge Tip TypeButton Tip
-
Hinge CornerSquare Corner
-
Hole PatternCommercial "C" Pattern
-
Number of Holes6 Holes
-
- Dimensions
-
Hinge Size3-1/2" x 3-1/2"
-
- Installation
-
Door TypeWooden Door
-
Installation Screws#12 x 1 1/4” Provided
-
- Finishes
-
FinishSatin Stainless Steel (US32D)
-
- Compliance Details
-
Warranty5 Year Limited Warranty
-