Hettich SlideLine M 9227183 Double Runner Profile, 98" Track
Double Runner Profile for use with SlideLine M 9156338 and 9156339 Door Hardware for Inset Doors. 98.43" (2500 m) Length Silver Anodized Aluminum Track for 2 to 3 door cabinets. Easy screw on or glue on installation.
Please note: Two runner profiles needed per 2 door or 3 door cabinet.
PRICED PER SET - See Product Details and Specs in the tabs below.
Click to view and print Hettich SlideLine M Full Line Catalog.
Double Runner Profile for sliding door furniture hardware.
Finish: Silver Anodized Aluminum
Door Type: For wood, glass or aluminum framed doors.
Applications: For inset, bottom running doors. Used in conjunction with Hettich SlideLine M 9156338 and 9156339 Door Hardware.
Length: 98.43" (2500 mm). Can be cut down to size on the field.
Maximum Door Weight: 66.14 Lbs (30 kg.)
Door Width: Minimum - 11.8" (300 mm) Maximum - 70.87" (1800 mm).
Door Height: 78.74" (2000 mm) Maximum. Door height may be no higher than twice the door width for quality and safety purposes. Sliding doors can be perfectly aligned with the integrated height adjuster (+/- 2mm). See compliance details for further information.
How to Order: Two runner profiles needed per 2 door or 3 door cabinet. Used as top and bottom runner profile.
Installation: Quick and easy screw on or glue on installation. Press in Runner Profiles available.
Compliance Details: Tested to EN 15706, Level 3
Please note, detailed images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail.
This product has a 1 year guarantee against defects in material and workmanship.
Click to view our Full Warranty Policy.
Click to view our Hettich 9227188 SlideLine M Profile, Press In Application.
-
QuickShipNo
-
ManufacturerHettich
-
MPN9227183; 9227186
-
Product OptionsScrew On Installation #9227183, Glue On Installation #9227186
Tested to EN 15706, Level 1 or 3
When constructing furniture it is important to note that the sliding door must be no higher than twice its width. Up to this relative height, SlideLine M meets the above stated quality and safety requirements for DIN EN 15706. If the specified maximum relative height is exceeded, the furniture construction must undergo a function and safety test as defined in the relevant furniture standard.
Under DIN EN 15706 Level 1, the version of the fitting without Silent System is approved for use if it passes the 2 kg closing test provided for there. If a higher loading capacity is to be reached, e.g. on the grounds of requirements defined in a relevant furniture standard, this must be ensured by the fabricator in terms of furniture design (e.g. inset installation.)