Ives Piano Hinge, Pin and Barrel, Full Mortise, Concealed, 1012 Cold-Rolled Steel Continuous Hinge

Ives Piano Hinge, Concealed, 1012 Cold-Rolled Steel Continuous Hinge, 83 in.
Ives

Ives 600 is a Pin and Barrel, Full Mortise, Concealed, Steel Continuous Hinge. It features a nylon self-lubricating, medical-grade split bearing design which is mounted on the door stile’s side and the inside of the frame side jamb, whereby only the pin and barrel is visible when the door is closed. It has a 1/4" diameter pin, a 1/8” door inset and is constructed for doors that are maximum 48" wide and up to 600 pounds. Available in various sizes; choose from the dropdown below.

See full product details and specs in tabs below.

PRICED PER PIECE

See tabs below for additional information
    • SKU
      VS600-USP-83
    • Market price:$330.12
      • save 30%
    • Starting price: Price: $231.08 per item
     

    Steel, pin and barrel, continuous hinges stretches along the entire length of the door and frame, ensuring door alignment is maintained for the lifetime of the building. The standard series pin and barrel continuous hinges feature twin self lubricated, nylon bearings with a stainless steel pin.

    Material: 1012 Cold-rolled steel

    Available lengths: Choose from the options above.

    Handing: Non Handed.

    Finish: USP - Grey primer paint - Steel

    Design:

    • 1/4" Diameter pin with nylon self-lubricating, medical-grade split bearing design.
    • 1/8” Door inset, recommended for 1 3/4" doors.

    Hardware Included: 

    • 10 x 1/2" Stainless self drilling / self tapping phillips head screw.
    • 10 x 1" Stainless phillips head wood screw.

    Door Type: 

    • For bevel or square edge doors.
    • For doors with a maximum width of 48".
    • For doors weighing up to 300 pounds without reinforcing. 
    • For doors weighing up to 600 pounds with reinforcing.

    Hospital Tip Feature: Optional ligature resistant and tamper resistant Hospital Tip Cap which provides a single uniform 45° angle surface with no exposed edges or openings. Choose from the options above.

    Electrical Options: Additional electrification options including Electric power transfer and Electrical through wire panel, and optional mounting hardware may be ordered. For details and pricing please contact us or call our office at 845-388-1300.

    Compliance Details:

    • Meets ANSI 156.26 for 150lbs. and 300lbs.
    • UL10C certified.

    Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See Product Specs for exact measurements.

    This product has a 1 year warranty against defects in materials and workmanship.
     Click here to view our Full Warranty Policy.

    Click here to view our Ives 715CS Pin and Barrel, Full Mortise, Half Wrap, Continuous Hinge with Decorative Cover.

      • SKU
        VS600-USP-83
    • QuickShip
      No
    • Manufacturer
      Ives
    • MPN
      600
    • Hospital Tip
      Not Required, Required

    SHIPPING / PROCESSING TIME:

    This product ships directly from the manufacturer. 
    Zero is experiencing Significant Delays. If you are in a rush please call us for alternative options.



    • Domestic Shipping Fees- (Hawaii and Alaska not Included):
      • FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders). 
      • There will be a flat $19.99 shipping and handling fee on orders under $300.00.
      • Oversize: Orders containing items sized 50" - 95" have an oversize surcharge of $49.99.
      • Freight Items: Orders containing items sized 96" - 108" have an oversize surcharge of $199.99.
      • Oversize Freight Items: Orders containing items sized 109" and above have an oversize surcharge of $299.99.
      • Orders totals above $2,000.00 will ship free, regardless of size.
         
    • Alaska and Hawaii, Canada, and International Shipping:
    • Returns:
      • This product is custom made and is not returnable.
      • We are committed to your satisfaction, as a courtesy, we may, at our discretion accept returns with a minimum 30% restock fee.
      • CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within Seven (7) days of receipt of goods.
      • Weatherstripping products will not be considered for returns.
      • Item must be in new, re-saleable condition.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
      • Return shipping is customer's responsibility. A return address will be provided with RMA#.
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.