NGP 115 Meeting Stile, .625" Aluminum Casing with .375" EPDM Seal

NGP 115 meeting stile is designed to be surface mounted to the face of doors to seal a gap between a pair of double active doors. Comes with .625" Aluminum casing and .375" EPDM Seal. Available in various anodized finishes and length is custom cut to size.

PRICED PER FOOT - See full product details and specs in the tabs below.

See tabs below for additional information

Finish
Length
Set

Quantity

Add to compare

NGP 115 meeting stile is designed to be surface mounted to the face of doors to seal a gap between a pair of double active doors. Comes with .625" Aluminum casing and .375" EPDM Seal.

Seals: Contains a Black/Gray .375" EPDM Seal. It has very good abrasion resistance, tensile strength and memory.

Please note:

Fire-rated Astragal Seals cannot replace any astragal required on the door by the door manufacturer to maintain its fire label
IBC, NFPA 80, NFPA105, and NFPA 252 require the gap at the meeting edge between fire labeled doors must not exceed 1/8"

Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

This product has a 3 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.

For additional Meeting Stiles see our NGP 125 Meeting Stile, .875" Aluminum Casing with .375" EPDM Seal

- SKU
  NG115NA
QuickShip
No
Manufacturer
National Guard Products
MPN
115N
Set
Not Required, Required
About This Product
- Retainer Material
  Aluminum
- Seal Type
  EPDM
- Door Type
  Double Active Doors
- Mounting
  Surface Mounted
- Temperature Range
  -60°F thru 250°F
Dimensions
- Seal Height
  3.8"
- Total Height
  1"
Installation
- Installation Screws
  #6 x 3/4" stainless steel SMS provided
Finishes
- Finish
  Clear Anodized Aluminum (US28), Dark Bronze Anodized Aluminum (313), Bronze Finish
Compliance Details
- Compliance Details
  UL Classified, Smoke Rated, Air Infiltration Rated, BHMA Certified
- ANSI Designation
  R3J735
- Warranty
  3 Year Limited Warranty

Click to Print

Click to Print Installation Guide

Anodized Aluminum complies with ANSI/BHMA US28 / 628

SHIPPING / PROCESSING TIME:

This product ships directly from the manufacturer.

Please allow 2 - 3 weeks to ship

Exception: Bronze Anodized products require 4 - 5 weeks to ship

Domestic Shipping Fees- (Hawaii and Alaska not Included):
- FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders).
- There will be a flat $19.99 shipping and handling fee on orders under $300.00.
- Oversize: Orders containing items sized 50" - 95" have an oversize surcharge of $49.99.
- Freight Items: Orders containing items sized 96" - 108" have an oversize surcharge of $199.99.
- Oversize Freight Items: Orders containing items sized 109" and above have an oversize surcharge of $299.99.
- Orders totals above $2,000.00 will ship free, regardless of size.
Alaska and Hawaii, Canada, and International Shipping:
- Please see our Shipping Information page for details.
Returns:
- This product is custom made and is not returnable.
- We are committed to your satisfaction, as a courtesy, we may, at our discretion accept returns with a minimum 30% restock fee.
- CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within Seven (7) days of receipt of goods.
- Weatherstripping products will not be considered for returns.
- Item must be in new, resalable condition.
- Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
- Return shipping is customer's responsibility. A return address will be provided with RMA#.
- If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.