NGP 95WH Door Shoe Sweep, U Shaped Aluminum Casing with Rain Drip, .625" Nylon Brush Seal
NGP 95WH Door Shoe with U Shaped Aluminum Casing is ideal for protecting the bottom of doors while sealing the gap up to .625". It has a rain drip design which provides extra protection against water seepage. It is compatible with 1.75" doors with a standard 3/4" undercut. Comes with a nylon brush seal. Available in two aluminum finishes and length is custom cut to size.
PRICED PER FOOT - See full product details and specs in the tabs below
NGP 95WH Door Shoe with U Shaped Aluminum Casing is ideal for protecting the bottom of doors while sealing the gap up to .625". It has a rain drip design which provides extra protection against water seepage. This product is designed for use on standard 3/4" undercut door and used with NGP 896 V, N, or S ADA compliant threshold
Door Compatibility: Wood or Metal Doors 1.75" with standard 3/4" undercut used with NGP 896 V, N, or S ADA compliant threshold.
Compliance Details: REACH and RoHS compliant, BHMA Certified, UL Certified, Positive Pressure Certified, Smoke Rated, Air Infiltration Tested.
Seals: Contains a .625" Black/Gray Nylon Brush Seal. It has very good abrasion resistance, tensile strength and memory.
Installation: Drilled for easy installation and supplied with #6 x 3/4" stainless steel SMS. Installation guide provided.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For additional Door Shoes see our NGP 112N Door Shoe Sweep, Aluminum Track with .75" Neoprene Seal
-
QuickShipNo
-
ManufacturerNational Guard Products
-
MPN95WH
- About this Product
-
Door Shoe Retainer MaterialAluminum
-
Temperature Range-70°F thru 425°F
-
Door TypeWooden Door, Metal Door
-
Seal TypeNylon Brush Seal
-
MountingDoor Shoe Mount
-
- Dimensions
-
Seal Height3/8" Height
-
Total Height1-1/8" Height
-
LengthCustom Cut to Size
-
Door Thickness1-3/4" Thick
-
- Installation
-
Drill HolesDrill holes are provided
-
Installation Screws#6 x 3/4" stainless steel SMS screws provided
-
- Special Features
-
Rain Drip CapYes
-
- Finishes
-
FinishMill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313)
-
- Compliance Details
-
Compliance DetailsSmoke Rated, BHMA Certified, UL Classified, Air Infiltration Rated
-
ANSI DesignationR3A516
-
Warranty3 Year Limited Warranty
-

