NGP 99T6 Door Shoe Sweep, U Shaped Aluminum with 2.75" Rigid Kickplate and Two .5625" Thermoplastic Triple Fin Seals
NGP 99T6 Door Shoe is ideal for protecting the bottom of doors while sealing the gap up to .5625" at your door bottom. It combines a 2.75" rigid kick-plate with the casing for extra protection from traffic abuse or to restore a badly damaged door to an almost new condition, thus eliminating the need to replace the door. It is compatible with doors of 1.75" thickness. Comes with two Thermoplastic Triple Fin seals. Available in two aluminum finishes and length is custom cut to size.
PRICED PER FOOT - See full product details and specs in the tabs below
NGP 99T6 Door Shoe is ideal for protecting the bottom of doors while sealing the gap up to .5625" at your door bottom. It combines a 2.75" rigid kick-plate with the casing for extra protection from traffic abuse or to restore a badly damaged door to an almost new condition, thus eliminating the need to replace the door.
Seals: Contains two .5625" Dark Brown Thermoplastic Triple Fin Seals. Oxidative degradation from age and exposure to cold, heat and UV causes hardening, loss of memory and resilience, cracking, crazing and discoloration.
Kickplate: 2.75" rigid kickplate for extra protection from traffic abuse or to restore a badly damaged door to an almost new condition, thus eliminating the need to replace the door.
Installation: Drilled for easy installation and supplied with #6 x 3/4" stainless steel SMS. Installation guide provided.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For additional Door Shoes see our NGP 99TWH Door Shoe Sweep, U Shaped Aluminum with 2.75" Kickplate and .6875" Nylon Brush and Thermoplastic Triple Fin Seals
-
QuickShipNo
-
ManufacturerNational Guard Products
-
MPN99T6
- About this Product
-
Door Shoe Retainer MaterialAluminum
-
Temperature Range0°F thru 140°F
-
Door TypeWooden Door, Metal Door
-
Seal TypeThermoplastic
-
MountingDoor Shoe Mount
-
- Dimensions
-
Seal Height9/16" Height
-
Total Height3-7/16" Height
-
LengthCustom Cut to Size
-
Door Thickness1-3/4" Thick
-
- Installation
-
Drill HolesDrill holes are provided
-
Installation Screws#6 x 3/4" stainless steel SMS screws provided
-
- Finishes
-
FinishClear Anodized Aluminum (US28), Dark Bronze Anodized Aluminum (313)
-
- Compliance Details
-
Compliance DetailsSmoke Rated, UL Classified, Air Infiltration Rated
-
Warranty3 Year Limited Warranty
-