Pemko #1571 Transitional Threshold, 6.25" (W) Aluminum, .75” Offset
This item has been discontinued.
Click here to view all Transitional Thresholds.
Transitional / Offset Threshlds eliminate the tripping hazard associated with irregular floor surfaces. Transitional thresholds like this are often used when a threshold is required to meet with tile or carpet on one side.
Width: 6.25"
Offset Height: .75"
Total Height: 1"
Length: Custom cut to size up to 104" (Larger sizes can be purchased through our office)
Finishes: Three aluminum variations
Compliance Details: BHMA Certified, Fire Rated, UL Listed
Installation: Installation instructions and screws provided. Screws are colored to coordinate with casing.
Drilling: Threshold is supplied drilled along the center line.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For a smaller offset height, click here to see our Transition Threshold 5.5" W and .25" Offset.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN1571
- Finishes
-
FinishMill Finish Aluminum (US27), Aluminum PemKote™, Dark Bronze Anodized Aluminum (313)
-
Click to View Ratings Explained
Finishes Comply with the Following ANSI / BHMA Codes:
- Aluminum Mill Finish - US27 / 719
- Aluminum Pemkote -
- Dark Bronze Anodized Aluminum - US10B / 710



