Pemko #2132 Carpet Edge Divider, 1.5" Aluminum with Wheelchair Accessibility, .4375" H

This wheelchair accessible Aluminum Carpet Divider is used to create a smooth transition between carpet and the adjacent flooring and to keep the carpet's edge from fraying. In addition, it provides a solid surface for a door sweep or door bottom to close against. It is strong and durable with a fluted finish to prevent slipping.

AVAILABLE IN STOCK SIZE LENGTHS OF 36" AND 72"

See tabs below for additional information

Quantity

Add to compare

This carpet edge divider is wheelchair accessible and creates a smooth transition between adjacent flooring to minimize tripping. Additionally, it covers and protects carpet edges to provide a finished appearance and prevent fraying. Carpet dividers provide a solid surface for a door sweep or door bottom to close against.

Key Features of This Product

Applications: Appropriate for tile, wood, or other surfaces, in both residential and commercial applications.

Dimensions: Carpet Divider measures 1.50” in width and .4375” in height. See product specs for product drawing.

Finishes: aluminum mill finish

Compliance Details: It complies with ADA regulations making it wheelchair accessible.

Aluminum and Anodized Carpet Divider
ADA approved (wheelchair accessible)
Protects carpet edge from fraying
.4375" height
1.50" wide
For tile, wood, other floor material.
Available in 36" and 72" lengths.

Installation instructions and drive nails provided. If the subfloor is concrete, pre-drill holes with a masonry bit for the nails or screws that hold the carpet bar in place.

Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

This product has a 5 year guarantee against defects in material and workmanship.

Click here to see our Full Warranty Policy.

For a carpet divider that is 1.00" wide, see our Carpet Edge Divider, Aluminum, Anodized, 1.00”" W, .375"H

- SKU
  PK2132A36
QuickShip
No
Manufacturer
Pemko Manufacturing
MPN
2132
Length
36", 72"
Finishes
- Finish
  Mill Finish Aluminum (US27)

Click to Print

P2132 Product Specs:

Click to Print

P2132 Installation Guide:

Click to View Ratings Explained

Finishes Comply with the Following ANSI / BHMA Codes:

Aluminum Mill Finish - US27 / 719
Gold Anodized Aluminum - US4 / 68

SHIPPING / PROCESSING TIME:

This product ships directly from the manufacturer.

Please allow 2 - 3 weeks to ship

Domestic Shipping Fees- (Hawaii and Alaska not Included):
- FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders).
- There will be a flat $19.99 shipping and handling fee on orders under $300.00.
- Oversize: Orders containing items sized 50" - 95" have an oversize surcharge of $49.99.
- Freight Items: Orders containing items sized 96" - 108" have an oversize surcharge of $199.00.
- Oversize Freight Items: Orders containing items sized 109" and above have an oversize surcharge of $299.99.
- Orders totals above $2,000.00 will ship free, regardless of size.
Alaska and Hawaii, Canada, and International Shipping:
- Please see our Shipping Information page for details.
Returns:
- This product is custom made and is not returnable.
- We are committed to your satisfaction, as a courtesy, we may, at our discretion accept returns with a minimum 35% restock fee.
- CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within Seven (7) days of receipt of goods.
- Weatherstripping products will not be considered for returns.
- Item must be in new, re-saleable condition.
- Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
- Return shipping is customer's responsibility. A return address will be provided with RMA#.
- If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.