Hager 1257, Full Mortised, Reverse Action Spring Hinge, Stain Chrome US26D, 4.5" x 4.5"
Hager 1257 Full Mortised, Single Acting Reverse Action, Architectural Spring Hinge with square corners. Reverse action spring hinge for automatic opening of doors. See below for door size and weight recommendations. Hinge made of Steel with steel components.
Hinge size is 4.5" x 4.5" and it is Satin Chrome Plated (US26D).
PRICED PER PIECE
Hager 1257 Full Mortised, Single Acting Reverse Action, Architectural Spring Hinge with square corners. Reverse action spring hinge for automatic opening of doors.
Available Sizes:
Hinge Size | Gauge of Metal | Hole Count | Screw Size | ||
Inches | mm | Machine | Wood | ||
4-1/2" x 4-1/2" | 114 x 114 | 0.134 | 8 | 1/2 x 12-24 | 1-1/4 x 12 |
Series | Size | Recommended Max Door Weight (lbs.) | Spring Hinge | Ball Bearing Hinge |
1257 - For 1 3/4" (45mm) Door | 4 1/2 x 4 1/2 | 70 | 1 | 2 |
For maximum versatility, use all spring hinges or a combination of spring and ball bearing hinges. Do not use plain bearing hinges.
Adjustable Tension: You could set the tension easily, as you need, using a tension bar and set pin (provided). See Installation Instructions for more information. Full spring tension may not be required.
Strong wind conditions, drafts, carpeting drag, twisted/misaligned frames or weather-stripping on doors may require additional spring hinges.
Usage on Fire Rated Doors: NFPA 80 has restricted the use of architectural grade spring hinges to fire rated doors of a maximum size of 3'0" x 7'0". Hager spring hinges have been tested and labeled for up to a 4'0" x 8'0" door when a minimum of three springs are used.
Priced per hinge.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3 year guarantee against defects in workmanship and materials.
Click to view our Full Warranty Policy.
Click here to view our Hager 1256 Singe Acting Spring Hinge Set.
-
QuickShipNo
-
ManufacturerHager Companies
-
MPN1257
- Product Design
-
Hinge CategorySpring Full Mortised Hinge
-
Base MaterialSteel
-
Usage LevelStandard Duty
-
ThrowStandard Throw
-
Bearing TypeReverse Action Single Spring
-
Knuckles3 Knuckle Hinge
-
Pin TypeStandard Hinge Pin
-
Hinge Tip TypeButton Tip
-
Hinge CornerSquare Corner
-
Hole PatternCommercial "C" Pattern
-
Number of Holes8 Holes
-
- Dimensions
-
Hinge Size4-1/2" x 4-1/2"
-
Hinge Thickness.134" Thick
-
- Installation
-
Door TypeWooden Door, Metal Door
-
Installation ScrewsInstallation Screws Provided Accordingly:
4-1/2" x 4-1/2" Hinge: All metal screws and all wood screws.
Additional screw packs can be provided if listed in order comments before completing purchase.
-
- Finishes
-
FinishSatin Chrome (US26D)
-
- Compliance Details
-
Compliance DetailsBHMA Certified
-
ANSI DesignationK81071, A156.1
-
Warranty3 Year Limited Warranty
-
Click to Print 4-1/2" Hinge Template
Click to Print Installation Instructions