Pemko #101 Interlocking Threshold Cap, 1.125" W Aluminum or Bronze Set, .3” H
Threshold caps and interlocking J-Hook (provided) transform a standard saddle threshold into an interlocking threshold that completely halts the transfer of water, dirt, sound, and insects beneath the door. Threshold Caps can also be used alone as a low, narrow interlocking threshold. Available in Aluminum mill finish, bronze mill finish, and two anodized finishes. Custom cut to size.
PRICED BY THE FOOT
This Butt Threshold is designed to, though not limited to, be applied above an existing threshold or floor closer to create an interlocking threshold design.
Width: 1.125" (1-1/8")
Height: .3" (5/16")
Length: Custom cut to size up to 104" (larger sizes can be purchased through our office)
Finishes: Three aluminum variations and Bronze mill finish (Oil rubbed bronze can also be purchased through our office for an additional 40% of standard bronze pricing.)
A Note on Finishes: Aluminum Mill Finish is plain smooth metal as it comes from the mill, without a coating. Bronze is a mill finish, sometimes referred to as Architectural Bronze. It is a solid bronze piece, which increases longevity and aesthetics, thus the large difference in price. It gets darker in color in time when exposed to the environment. Anodizing is an electrolytic process that applies a corrosion-resistant coating to the aluminum for longer wear and color maintenance.
Compliance Details: BHMA Certified
Interlocking Options: Compatible with the Interlocking J Hook (provided), Surface Mounted Interlocking Angles and Under-side of Door Mount Interlocking Angles made by Pemko (Product number begins with a “P”.) Interlocking hooks sold separately
Installation: Installation guide and screws provided. Screws are colored to coordinate with casing. When installing into concrete, an Expansion Anchor is recommended.
Drilling: Threshold is drilled for easy installation
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
Need a slightly taller threshold cap? Check out our Residential Threshold Cap, Interlocking Aluminum or Bronze, .44" H.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN101
- Dimensions
-
Overall Height.3" Height
-
Overall Width1.125" Width
-
Threshold LengthCustom Cut to Size
-
- Product Design
-
Threshold TypeInterlocking Threshold
-
MaterialAluminum, Bronze
-
- Installation
-
Drilling HolesDrilling holes provided
-
FastenersFasteners Provided
-
- Finishes
-
FinishMill Finish Aluminum (US27), Bronze Mill Finish (Brass), Dark Bronze Anodized Aluminum (313)
-
- Compliance Details
-
Warranty5 Year Limited Warranty
-
BHMA Certified
Products indicated by this symbol have been voluntarily submitted to rigid third party testing and follow-up audits to confirm that these products fully and continuously meet or exceed the requirements of their respective ANSI/BHMA Standards. These products are listed in the BHMA Directory of Certified Products, published annually and available for purchase from BHMA. They are also posted and frequently updated on the BHMA web site at www.buildershardware.com.
These products meet the requirements of ANSI/BHMA C06041 Standard for Door Closers.
Finishes Comply with the Following ANSI / BHMA Codes:
- Aluminum Mill Finish - US27 / 719
- Bronze Mill Finish (Brass) - US4 / 720
- Dark Bronze Anodized Aluminum - US10B / 710
- Bright Dip Gold Anodized Aluminum - US3 / 707
- Gold Anodized Aluminum - US4 / 688