Pemko #107 Interlocking Threshold Cap, 1.125" Aluminum Set, .44” H

This item has been discontinued.

For a similar item, see Pemko #101 Interlocking Threshold Cap.

See tabs below for additional information

Finish
Size (Inches)

This Butt Threshold is designed to, though not limited to, be applied above an existing threshold or floor closer to create an interlocking threshold design.

Width: 1.125" (1-1/8")

Height: .44" (7/16")

Length: Custom cut to size up to 104" (larger sizes can be purchased through our office)

Finishes: Three aluminum variations

Compliance Details: BHMA Certified

Interlocking Options: Compatible with the Interlocking J Hook (provided), Surface Mounted Interlocking Angles and Under-side of Door Mount Interlocking Angles made by Pemko (Product number begins with a “P”.) Interlocking hooks sold separately

Installation: Installation guide and screws provided. Screws are colored to coordinate with casing. When installing into concrete, an Expansion Anchor is recommended.

Drilling: Threshold is drilled for easy installation

Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.

Need a slightly lower threshold cap? Check out our Residential Threshold Cap, Interlocking Aluminum or Bronze, .3" H.

- SKU
  PK107A
QuickShip
No
Manufacturer
Pemko Manufacturing
MPN
107
Dimensions
- Overall Height
  .44" Height
- Overall Width
  1.125" Width
- Threshold Length
  Custom Cut to Size
Product Design
- Flat Saddle Design
  Fluted (Grooved) Design
- Threshold Type
  Interlocking Threshold
- Material
  Aluminum
Installation
- Drilling Holes
  Drilling holes provided
- Fasteners
  Fasteners Provided
Finishes
- Finish
  Mill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313)
Compliance Details
- Warranty
  5 Year Limited Warranty

Click to Print

P107 Product Specs:

Threshold Cap Interlocking J-Hook

Click to Print

P107 Installation Guide:

BHMA Certified

Products indicated by this symbol have been voluntarily submitted to rigid third party testing and follow-up audits to confirm that these products fully and continuously meet or exceed the requirements of their respective ANSI/BHMA Standards. These products are listed in the BHMA Directory of Certified Products, published annually and available for purchase from BHMA. They are also posted and frequently updated on the BHMA web site at www.buildershardware.com.

These products meet the requirements of ANSI/BHMA C06041 Standard for Door Closers.

Finishes Comply with the Following ANSI / BHMA Codes:

Aluminum Mill Finish - US27 / 719
Dark Bronze Anodized Aluminum - US10B / 710
Gold Anodized Aluminum - US4 / 688

SHIPPING / PROCESSING TIME:

This product ships directly from the manufacturer.

Please allow 2 - 3 weeks to ship

Domestic Shipping Fees- (Hawaii and Alaska not Included):
- FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders).
- There will be a flat $19.99 shipping and handling fee on orders under $300.00.
- Freight Items: Orders containing items sized 90" - 96" have an oversize surcharge of $199.00.
- Oversize Freight Items: Orders containing items sized 97" and above have an oversize surcharge of $250.00.
- Orders totals above $2,000.00 will ship free, regardless of size.
Alaska and Hawaii, Canada, and International Shipping:
- Please see our Shipping Information page for details.
Returns:
- This product is custom made and is not returnable.
- We are committed to your satisfaction, as a courtesy, we may, at our discretion accept returns with a minimum 25% restock fee.
- CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within ten (10) days of receipt of goods.
- Weatherstripping products will not be considered for returns.
- Item must be in new, re-saleable condition.
- Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
- Return shipping is customer's responsibility. A return address will be provided with RMA#.
- If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.