Hager 5300, Aluminum HD Surface Door Closer, Up to 250 LB

Hager 5300 Series offer a compact design, made of aluminum alloy, intended to be installed indoors for standard use and foot traffic. This model has a full rack and pinion operation, and is non handed. Sizing is adjustable from 1 - 6 (see below) and is ideal for doors weighing up to 250 LB. Available with delayed action option and in various finishes.

PRICED PER PACKAGE - See full product details and specs in the tabs below

Some variants qualify for QUICK SHIP! See shipping tab for details.

See tabs below for additional information

Finish
Arm Type
Cover Type
Delayed Action

Quantity

Add to compare

For additional informtion, click here to view Hager 5300 Series from Hager Full Line Catalog.

Standard Package Contains:

Closer Body (5301)
Closer Cover (5302)
Pinion Cap (5902)
Main Arm Assembly (5303)
Standard Screw Pack (5304)
Parallel Arm Bracket (5900)
SNB Screw Pack for 1-3/4" Doors (5902)

Features:

Ideal for schools, hospitals and other high-use environments
Full Rack and Pinion Operation
Up to 250 Lb per door
Non Handed, can be used in both right and left handed assemblies
Sizes: 1-6; 24" - 60" Opening (see installation guide tab for more information)

Certifications: ADA Compliant, BHMA Certified, UL Listed. See Compliance Details under Installation Tab for more information.

Covers - Select from options above

Full Plastic Cover (Standard)
Lead Lined Cover
Plated Metal Cover (Optional, can be purchased through our office)

Closer Body:

Aluminum Alloy
Recommended Temperature for prolonged use is -40ºF to 150ºF

Springs:

Double heat treated steel, tempered springs

Valves:

Adjustable latching and sweep speed valve
Adjustable back check valve (Standard)
Delayed Action Valve (Optional)
Staked valves (Standard)

Arms and Brackets:

Tri-Pack: Regular, Parallel Arm and Top Jamb Mount (Standard)
15% power adjustment in standard arm for regular and top jamb mount

Finishes:

Rust inhibiting primer (standard)
Sprayed Aluminum/ALM; Sprayed Bronze/BRZ; Sprayed Dark Bronze/DBZ; Sprayed Gold/GOL

Custom finishes available. For details and pricing please contact us or call us at 845-388-1300.

Sizes: Closer adjustable to sizes 1-6. Adjustable sizes ensure that the overhead door closer will fit any door width

Door Thickness:

1-3/4" Door Thickness (Standard)
1-3/8" - 2-1/4" Door Thickness, please list door thickness in order comments before completing purchase

Additional Arm Options: See options tab for more details.

Heavy Duty Arm (Recommended for exterior applications with drafts and windy conditions or applications with extreme usage)
Standard Hold Open Arm
Extra Heavy Duty Hold Open Arm
Extra Heavy Duty Stop Arm
Extra Heavy Duty Hold Open Cushion Stop Arm
Extra Heavy Duty Cushion Arm
Extra Heavy Duty Hold Open Stop Arm

Use of Door Stops: It is important to use an auxiliary door stop to protect the wall, trim, door and closer. A stop should be used even when a closer with backcheck is used, see our full line of Door Holders and Stops.

Fasteners: Self-reaming, self-tapping wood and machine screws. Sex nuts and bolts. All installation screws included.

Closer Adjustments: All Hagers' door closers are equipped with key control valves that allow for easy adjustments while decreasing the chances for tampering. Adjustment valves are staked to prevent accidental removal.

Sweep and Latching Speeds- Two separate valves control the closing speed of the door. The sweep speed controls the speed of the door from full opening to within approximately 2^º-10^º of the closed position. Latching speed valve controls the speed of the door from approximately 2^º-10^º to full closing.
Backcheck-Backcheck starts at approximately 70^º in the opening cycle and slows the door as it opens. This feature is not to be used as a positive stop. An auxiliary stop must be used.
Delayed Action- This feature is available for all 5200 Series applications. The closing time between 90^º and 70^º shall be a minimum of 20 seconds, but is adjustable to be even slower.

Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail.

This product has a lifetime guarantee against defects in workmanship and materials.
Click here to view our Full Warranty Policy.

Click here to view Hager 5200 Door Closer Series.

- SKU
  HG5300-ALM
QuickShip
No
Manufacturer
Hager Companies
MPN
5300 Series
Arm Type
Standard Included (Interior), Heavy Duty Arm (Exterior), Standard Hold Open, Heavy Duty Hold Open - Right, Heavy Duty Hold Open - Left, Heavy Duty Stop, Heavy Duty Hold Open Cushion, Heavy Duty Cushion, Heavy Duty Hold Open Stop
Cover Type
Standard Included Cover, Lead Lined Cover
Delayed Action
Not Required, Required
Finishes
- Finish
  Aluminum Painted (689), Sprayed Bronze, Sprayed Dark Bronze, Sprayed Gold

Click to Print Regular Arm and Top Jamb Mount Template Instructions

Click to Print Parallel Arm Mount Template Instructions

Click to Print Installation Guide

Door Closer Sizing Charts: (Minimum door width is 24")

Exterior & Vestibule Door Width	24"- 30"	30"- 36"	36"- 42"	42"- 48"
Regular and Top Jamb	Size 3	Size 4	Size 5	Size 6
Parallel	Size 3	Size 4	Size 5	---

Interior Door Width	24"- 30"	30"- 34"	34"- 38"	38"- 48"	48"- 54"	54"- 60"
Regular and Top Jamb	Size 1	Size 2	Size 3	Size 4	Size 5	Size 6
Parallel	Size 1	Size 2	Size 3	Size 4	Size 5	---

Arm can be assembled in 3 ways

Regular Arm Mount (Pull Side):

Overview- The regular arm application is used when there is ample room on the top rail of the door and you are not concerned about the arm extending out away from the door. The closer body is mounted on the hinge side of the top rail of the door. the forearm is then mounted to the frame face by a mounting shoe. The arm projects at approximately a 90^º angle away from the door. This arm mount will make the closer more power efficient than the parallel arm or top-jamb mount. This mount is recommended for interior door applications when possible.

Opening: Templating allows up to 180°
Hold Open: Hold Open points from 90° up to 180° with hold open arm
Frame Face: 1-3/8"
Ceiling Clearance:
- 1-5/8" minimum
- 1-5/8" minimum for hold open arm
Top Rail: 2-1/2" minimum without drop plate, 5915
Top Rail Clearance: 4-1/4" minimum from the top of the door

Parallel Arm Mount (Push Side):

Overview- The depth of the top rail is an important consideration when using this application. The closer body is mounted on the top rail of the door, opposite the hinge side of the door. The forearm is mounted by a parallel arm bracket to the underside of the frame. The arm is parallel to the door, which make it less likely to be damaged and aids in the overall aesthetics. the power efficiency of the closer may be reduced by the mounting applications.

Opening: Templating allows up to 180°
Hold Open: Hold Open points from 90° up to 180° with hold open
Top Rail
- Standard hollow metal 5/8" frame stop
- 4-3/4" minimum
- 4" minimum with hold open
- 3-1/8" minimum with plate
- 2-1/8" minimum with hold open and plate
Top Rail Clearance: 5-3/4" minimum from the top of the door

Top Jamb Mount (Push Side):

Overview - This is the preferred method of mounting a closer if you are faced with a narrow rail on a door. The closer body is mounted to the frame face above the door, opposited the door hinge side. The forearm is then mounted to the top rail of the door. The top jamb mount is more power-efficient than the parallel arm application.

Opening: Templating allows up to 180°
Hold Open: Hold Open points from 90° up to 180° with hold open arm
Frame Face: 1-3/4" minimum
Ceiling Clearance:
- 2-3/4" minimum
- 1-3/4" minimum with drop plate, 5918
Top Rail: 1-7/8" minimum
Top Rail Clearance:
- 2-1/8" minimum
- 2-3/4" minimum with drop plate, 5917
- 2-1/4" minimum for hold open, with drop plate, 5917
- 3-5/8" minimum with drop plate, 5915

BHMA Certified ANSI A156.4, Adjustable sizes 1 to 6
ADA Compliant ANSI A117.1 Accessibility Code
UL/cUL Listed for up to 3 hours
UL10C Positive Pressure Rated
UL10B Neutral Pressure Rated

If you have any questions about the available options, please contact us or call us at 845-388-1300.

DELAYED ACTION (DA)
This additional feature is available for all 5300 Series applications. The closing time between 90^º and 70^º shall be a minimum of 20 seconds, but is adjustable to be even slower. Select from options above
ADDITIONAL ARM OPTIONS
5911-EXTRA HEAVY DUTY ARM
Non-handed parallel arm Forged steel Click for Installation Instructions
5307-STANDARD HOLD OPEN ARM
Non-handed parallel arm Forged steel Mounts on the pull side or top jamb with a shallow reveal Friction hold open: These arms allow the door to be automatically placed in hold open position until the user puts force on the door to disengage the friction hold and cause the door to close. Note: Friction hold open arms are meant to be used in scenarios where the door is held open only occasionally. Click for Installation Instructions Click for Friction Hold Open Maintenance Guide
5912-EXTRA HEAVY DUTY HOLD OPEN ARM
Handed parallel arm. Please select Right or Left Handing Required above. Forged steel Hold open funcion Adjustable at the shoe Friction hold open: These arms allow the door to be automatically placed in hold open position until the user puts force on the door to disengage the friction hold and cause the door to close. Note: Friction hold open arms are meant to be used in scenarios where the door is held open only occasionally. Not for fire rated doors Click for Installation Instructions Click for Friction Hold Open Maintenance Guide
5907-EXTRA HEAVY DUTY STOP ARM
Non-handed parallel arm Forged steel Auxiliary stop in soffit shoe Click for Installation Instructions
5956-EXTRA HEAVY DUTY HOLD OPEN CUSHION STOP ARM
Contains Heavy Duty Hold Open Stop Arm (5906) and Spring Cushion Non-handed parallel arm Forged steel Plunger hold open: These arms are designed with a cam-type mechanism in the arm to allow it to be adjusted to any hold open position. The plunger arm does not include a positive stop but does include a bypass (breakway) feature, so the arm will not break if pushed beyond the hold open point. The plunger arm prevents overtravel and damage to the closer arm, door or frame. Hold open function Auxiliary stop in soffit shoe Click for Installation Instructions (Note: Installation is for Arm #5906) Click for Spring Cushion Installation
5957-EXTRA HEAVY DUTY CUSHION ARM
Contains Extra Heavy Duty Stop Arm (5907) and Spring Cushion Non-handed Forged steel Auxiliary stop in soffit shoe Click for Installation Instructions (Note: Installation is for Arm #5907) Click for Spring Cushion Installation
5906-EXTRA HEAVY DUTY HOLD OPEN STOP ARM
Non-handed parallel arm Forged steel Plunger hold open Hold open function Auxiliary stop in soffit shoe Click for Installation Instructions

QUICK SHIP PRODUCTS:
- Sprayed Aluminum > Delayed Action Not Required > Standard Arm (Stock #145672)
- Sprayed Dark Bronze > Delayed Action Not Required > Standard Arm (Stock #145674)
- Sprayed Aluminum > Delayed Action Not Required > Hold Open Arm (Stock #145676)

SHIPPING / PROCESSING TIME:

This product ships directly from the manufacturer.

Stocked Items: 2 - 5 Days
Out of Stock Items: 4 - 10 weeks

CALL TO CONFIRM STOCK

Domestic Shipping Fees- (Hawaii and Alaska not Included):
- FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders).
- There will be a flat $19.99 shipping and handling fee on orders under $300.00.
- Oversize: Orders containing items sized 50" - 95" have an oversize surcharge of $49.99.
- Freight Items: Orders containing items sized 96" - 108" have an oversize surcharge of $199.00.
- Oversize Freight Items: Orders containing items sized 109" and above have an oversize surcharge of $299.99.
- Orders totals above $2,000.00 will ship free, regardless of size.
Alaska and Hawaii, Canada, and International Shipping:
- Please see our Shipping Information page for details.
Returns:
- These items are non-returnable.
- We are committed to your satisfaction. As a courtesy, we may, at our discretion accept returns with a minimum 30% restock fee.
- CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within Seven (7) days of receipt of goods.
- Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
- Return shipping is customer's responsibility. A return address will be provided with RMA#.
- If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.