Hager 5400 Series Light-Duty Overhead Door Closer, Up to 200 LB

Hager 5400 Series door closer, constructed of aluminum alloy is intended for use on light duty commercial applications. This model is non handed and has fixed spring sizes, must be selected upon purchasing. Maximum weight allowance is determined by spring size selected.

PRICED PER PACKAGE - See full product details and specs in the tabs below

Some variants qualify for QUICK SHIP! See shipping tab for details.

See tabs below for additional information
    • SKU
      HG5400_ALM
    • Market price:$142.92
      • save 45%
    • Starting price: Price: $78.61 per item
     

    For additional informtion, click here to view Hager 5400 Series from Hager Full Line Catalog.

    Standard Package Contains:

    • Closer Body (5401)
    • Pinion Cap (5901)
    • Main Arm Assembly (5403)
    • Standard Screw Pack (5404)
    • Parallel Arm Bracket (5900)
    • SNB Screw Pack for 1-3/4" Doors (5902)

    Features:

    • Ideal for light duty commercial applications
    • Weight allowance is dependant on spring size, see below
    • Non Handed, can be used in both right and left handed assemblies
    • Contains Tri-Pack Arm Assembly (Regular Arm, Parallel or Tob Jamb Mount)

    Certifications: BHMA Certified, UL Listed. See Compliance Details under Installation Tab for more information.

    Covers: Pinion Cap (standard)

    Closer Body:

    • Aluminum Alloy, Grade 2
    • Recommended Temperature for prolonged use is -40ºF to 150ºF

    Springs: Double heat treated steel, tempered springs

    Valves:

    • Adjustable latching and sweep speed valve
    • Adjustable back check valve (optional)
    • Staked valves (Standard)

    Finishes: 

    • Rust inhibiting primer (standard)
    • Sprayed Aluminum/ALM; Sprayed Bronze/BRZ; Sprayed Dark Bronze/DBZ; Sprayed Gold/GOL 

    Door Closer Sizing Charts: (Select from above)

     

    Exterior & Vestibule Door Width 24"- 30" 30"- 36" 36"- 42" 42"- 48"
    Regular and Top Jamb Size 3 Size 4 Size 5 ---
    Parallel Size 3 Size 4 Size 5 ---
    Minimum door width of 24"

     

     Interior Door Width 24"- 30" 30"- 34" 34"- 38" 38"- 48" 48"- 54" 54"- 60"
    Regular and Top Jamb --- Size 2 Size 3 Size 4 Size 5 Size 6
    Parallel --- Size 2 Size 3 Size 4 Size 5 ---
    Minimum door width of 24"


    Door Thickness:

    • 1-3/4" Door Thickness (Standard)
    • 1-3/8" - 2-1/4" Door Thickness, please purchase through our office

    Closer Adjustments: All Hagers' door closers are equipped with key control valves that allow for easy adjustments while decreasing the chances for tampering. Adjustment valves are staked to prevent accidental removal.

    • Sweep and Latching Speeds- Two separate valves control the closing speed of the door. The sweep speed controls the speed of the door from full opening to within approximately 2º-10º of the closed position. Latching speed valve controls the speed of the door from approximately 2º-10º to full closing.
    • Backcheck-Backcheck starts at approximately 70º in the opening cycle and slows the door as it opens. This feature is not to be used as a positive stop. An auxiliary stop must be used. Select from options above.

    Use of Door Stops: It is important to use an auxiliary door stop to protect the wall, trim, door and closer. A stop should be used even when a closer with backcheck is used, see our full line of Door Holders and Stops.   

    Fasteners: Self-reaming, self-tapping wood and machine screws. Sex nuts and bolts. All installation screws included.

    Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. 

    This product has a 5 year warranty against defects in workmanship and materials.
    Click here to view our Full Warranty Policy.

    Click here to view all our Overhead Door Closers.

      • SKU
        HG5400_ALM
    • QuickShip
      No
    • Manufacturer
      Hager Companies
    • MPN
      5400
    • Size
      Size 2, Size 3, Size 4, Size 5
    • Backcheck
      Not Required, Required
    • Finishes
      • Finish
        Aluminum Painted (689), Sprayed Bronze, Sprayed Dark Bronze, Sprayed Gold

    Arm can be assembled in 3 ways

    Regular Arm Mount:

    Overview- The regular arm application is used when there is ample room on the top rail of the door and you are not concerned about the arm extending out away from the door. The closer body is mounted on the hinge side of the top rail of the door. the forearm is then mounted to the frame face by a mounting shoe. The arm projects at approximately a 90º angle away from the door. This arm mount will make the closer more power efficient than the parallel arm or top-jamb mount. This mount is recommended for interior door applications when possible.

    • ​Opening: Templating allows up to 180°
    • Frame Face: 1-1/2" minimum
    • Ceiling Clearance: 1-3/4" minimum
    • Top Rail: 2-1/4" minimum
    • Top Rail Clearance: 3-1/2" minimum

    Parallel Arm Mount:

    Overview- The depth of the top rail is an important consideration when using this application. The closer body is mounted on the top rail of the door, opposite the hinge side of the door. The forearm is mounted by a parallel arm bracket to the underside of the frame. The arm is parallel to the door, which make it less likely to be damaged and aids in the overall aesthetics. the power efficiency of the closer may be reduced by the mounting applications.

    • Opening: Templating allows up to 180°
    • Top Rail
      • 5/8" Frame Stop
      • 4-3/4" minimum
    • Top Rail Clearance: 5-3/4" minimum

    Top Jamb Mount:

    Overview - This is the preferred method of mounting a closer if you are faced with a narrow rail on a door. The closer body is mounted to the frame face above the door, opposited the door hinge side. The forearm is then mounted to the top rail of the door. The top jamb mount is more power-efficient than the parallel arm application.

    • ​Opening: Templating allows up to 180°
    • Frame Face: 1-3/4" minimum
    • Ceiling Clearance: 2-3/4" minimum
    • Top Rail: 1-7/8" minimum 
    • Top Rail Clearance: 2-1/8" minimum

     

    Click to Print Template Instructions

    Click to Print Installation Guide

    • BHMA Certified ANSI A156.4, Sizes 2, 3, 4,5 - Must Specify Above
    • UL/cUL Listed for up to 3 hours
    • UL10C Positive Pressure Rated
    • UL10B Neutral Pressure Rated
    • QUICK SHIP PRODUCTS:
      • Sprayed Aluminum > Size 3 > Backcheck Not Required
      • Sprayed Aluminum > Size 4 > Backcheck Not Required
      • Sprayed Aluminum > Size 5 > Backcheck Not Required

    SHIPPING / PROCESSING TIME:


    This product ships directly from the manufacturer. 
    Stocked Items: 2 - 5 Days
    Out of Stock Items: 4 - 10 weeks

    CALL TO CONFIRM STOCK
    • Domestic Shipping Fees- (Hawaii and Alaska not Included):
      • FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders). 
      • There will be a flat $19.99 shipping and handling fee on orders under $300.00.
      • Freight Items: Orders containing items sized 90" - 96" have an oversize surcharge of $199.00.
      • Oversize Freight Items: Orders containing items sized 97" and above have an oversize surcharge of $250.00.
      • Orders totals above $2,000.00 will ship free, regardless of size.
    • Alaska and Hawaii, Canada, and International Shipping:
    • Returns:
      • These items are non-returnable.
      • We are committed to your satisfaction. As a courtesy, we may, at our discretion accept returns with a minimum 30% restock fee.
      • CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within ten (10) days of receipt of goods.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
      • Return shipping is customer's responsibility. A return address will be provided with RMA#.
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.