NGP 118N Door Shoe Sweep, L Shaped Aluminum Casing with Rain Drip and .75" Neoprene Seal
NGP 118N Door Shoe with L Shaped Aluminum Casing is ideal for protecting the bottom of doors while sealing the gap up to .75". It has a rain drip design which provides extra protection against water seepage. It is compatible with doors at least 1.1875" thick. Comes with a Neoprene seal. Available in two aluminum finishes and length is custom cut to size.
PRICED PER FOOT - See full product details and specs in the tabs below
NGP 118N Door Shoe with L Shaped Aluminum Casing is ideal for protecting the bottom of doors while sealing the gap up to .75". It has a rain drip design which provides extra protection against water seepage.
Seals: Contains a .75" Black Neoprene Seal. It has very good abrasion resistance, tensile strength and memory.
Rain Drip Design: The casing has a rain drip design which provides extra protection against weather by deflecting water from the bottom of the door and preventing seepage.
Installation: The L-Shaped retainer is not as sturdy as the U-Shaped Version for 1.75" Doors, however it has the advantage of being able to be installed without removing the door. Drilled for easy installation and supplied with #6 x 3/4" stainless steel SMS. Installation guide provided.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For additional Door Shoes see our NGP 119N Door Shoe Sweep, U Shaped Aluminum with Rain Drip and .75" Neoprene Seal
-
QuickShipNo
-
ManufacturerNational Guard Products
-
MPN118N
- About this Product
-
Door Shoe Retainer MaterialAluminum
-
Temperature Range-20°F thru 200°F
-
Door TypeWooden Door, Metal Door
-
Seal TypeNeoprene Rubber Seal
-
MountingDoor Shoe Mount
-
- Dimensions
-
Seal Height3/4" Height
-
Total Height1-3/4" Height
-
Additional DimensionsDoor seal is 1-3/16" thick
-
LengthCustom Cut to Size
-
- Installation
-
Drill HolesDrill holes are provided
-
Installation Screws#6 x 3/4" stainless steel SMS screws provided
-
- Special Features
-
Rain Drip CapYes
-
- Finishes
-
FinishMill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313)
-
- Compliance Details
-
Compliance DetailsUL Classified, Smoke Rated, Air Infiltration Rated, BHMA Certified
-
ANSI DesignationR3B516
-
Warranty3 Year Limited Warranty
-