Photoluminescent Stairway Markings, 1"-2" Adhesive Strip
This product has been discontinued.
Click here to return to our Trademark Hardware homepage.
This product has been discontinued.
Click here to return to our Trademark Hardware homepage.
Photoluminsecent systems facilitate safe emergency exists when power systems have failed. They are designed for compliance with Building Code Standards RS 6-1/1A of New York City Building Code Section 27-383(b) for photoluminescent exit path marking adopted in May 2005, for both new construction and renovation.
The photoluminescent material is charged by exposure to ambient light and admits luminescent after the activating light source is no longer available. Made with top grade strontium pigments, the material in the system is non-electric, non-toxic and non-radioactive. It is designed for easy maintenance, maximum durability and good slip resistance in all conditions.
The photoluminecent strips feature aluminum backing and foam tape for superior adhesive to uneven surfaces, including brick found in many buildings. This backing system consistently outperforms typical vinyl materials which are best applied to smooth, clean surfaces.
These adhesive strips can be used for many applications. Such as Stair and Landing Edge Marks which identifies the limits of steps and leading edge of the landing. It can also be applied as floor demarcation lines for both wall and floor mounted demarcations and can be used in conjunction with other door hardware. Available in 2" width and 1" and is sold by the foot, up to 12 feet.
- High Quality Photoluminescent
- Made with top-grade strontium pigments
- Can be used for new or existing buildings
- Adheres well to uneven surfaces
- Slip resistant in all conditions
- Complies with NYC regulations
- Custom cut to size
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product can also be used in conjunction with a surface mounted automatic door bottom, see our Automatic Door Bottom, Photoluminescent Sill.
Please allow 7-14 days for this product to ship.
Click here to see our Photoluminescent Aluminum Mounted Strips.