Eclisse, Single Pocket Door, Metal Framing and Hardware

Sliding doors are a great solution to regain the space occupied by the radius of the door opening to help create a larger and more welcoming environment. Installing the sliding door as a pocket door that disappears into the wall further frees space and opens up greater furnishing possibilities. This single sliding pocket door is suitable both for refurbishment and new buildings, for all rooms of the house, especially hallways, bathrooms and closets.  

Please note, this product includes ONLY the door frame kit and does NOT include the door.

Jamb Kit: Eclisse Single Door Jamb Kit is recommended, purchase separately by selecting link.

Operation: The door opens by sliding inside the wall through an appropriate system commonly known as the ‘frame’. The frame is made up of a metal box inside the wall, a sliding system (track) located in the upper part that allows the door panel to slide inside the wall, and a vertical metal door stop that receives the closing door.

Additional Options - Select from above

• Eclisse Bias Soft Close
• Eclisse Bias DS Soft Close and Soft Open
• See additional options tab for more information.

The Eclisse Sliding Pocket Doors qualify as a premium-quality product, and comply with the following specific reliability and durability requirements.

• Sturdiness: The frame is as sturdy as the wall and it can be inspected to allow its maintenance without knocking the wall down.
• Smooth and light sliding of the door: The runners and the track ensure smooth and light movements and can be easily replaceable if they get damaged.
• Guarantee of a sliding internal passage Without flexes of the metal sheet making up the frame eliminating problems in the door sliding.
• Guarantee of a crack-resistant plaster solution: Being an integral part of the wall, the counterframe does not alter the appearance and consistency of the wall.
• Easy installation and maintenance: A frame that is easy to assemble and to install even by non-expert personnel guarantees and safeguards the product over time. This is possible thanks to a maintenance free track fully extractable which enables to retrofit accessories after the installation without having to break into wall.
• Extractable track - With this solution it is possible to replace any parts subject to wear, apply accessories and adjust the internal door stop mechanism.
• Runners with ball bearings - The sliding runners are certified to guarantee durability, smooth movements and a silent sliding. The standard load-bearing capacity is 220 lbs per pair.
• Alignment bar - This is a special galvanized metal sheet profile that facilitates the installation by aligning the counterframe with the metal door post.

Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See Product Specs for exact measurements.

This product has a 12 year warranty against defects in materials and workmanship.
  Click here to view our Full Warranty Policy.

Click here to view our Pocket Doors.