NGP 92TWH Door Shoe Sweep, U Shaped Aluminum with 2" Kickplate and a .6875" Nylon Brush and Thermoplastic Triple Fin Seal
NGP 92TWH Door Shoe is ideal for protecting the bottom of doors while sealing the gap up to .6875" at your door bottom. It combines a 2" kick-plate with the casing for extra protection from traffic abuse or to restore a badly damaged door to an almost new condition, thus eliminating the need to replace the door. It is compatible with doors of 1.75" thickness. Comes with a Nylon Brush and Thermoplastic Triple Fin seal. Available in two aluminum finishes and length is custom cut to size.
PRICED PER FOOT - See full product details and specs in the tabs below
NGP 92TWH Door Shoe is ideal for protecting the bottom of doors while sealing the gap up to .6875" at your door bottom. It combines a 2" kick-plate with the casing for extra protection from traffic abuse or to restore a badly damaged door to an almost new condition, thus eliminating the need to replace the door.
Seals: Contains a .6875" Gray Nylon Brush and Dark Brown Thermoplastic Triple Fin Seal. Oxidative degradation from age and exposure to cold, heat and UV causes hardening, loss of memory and resilience, cracking, crazing and discoloration.
Kickplate: 2" kickplate for extra protection from traffic abuse or to restore a badly damaged door to an almost new condition, thus eliminating the need to replace the door.
Installation: Drilled for easy installation and supplied with #6 x 3/4" stainless steel SMS. Installation guide provided.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For additional Door Shoes see our NGP 92V Door Shoe Sweep, U Shaped Aluminum with 2" Kickplate and a .5" Vinyl Seal
-
QuickShipNo
-
ManufacturerNational Guard Products
-
MPN92TWH
- About this Product
-
Door Shoe Retainer MaterialAluminum
-
Temperature Range0°F thru 140°F
-
Door TypeMetal Door, Wooden Door
-
Seal TypeNylon Brush Seal
-
MountingDoor Shoe Mount
-
- Dimensions
-
Seal Height11/16" Height
-
Total Height2-11/16" Height
-
Additional DimensionsDoor seal is 1-3/4" thick
-
LengthCustom Cut to Size
-
Door Thickness1-3/4" Thick
-
- Installation
-
Drill HolesDrill holes are provided
-
Installation Screws6 x 3/4" stainless steel SMS screws provided
-
- Finishes
-
FinishClear Anodized Aluminum (US28), Dark Bronze Anodized Aluminum (313)
-
- Compliance Details
-
Compliance DetailsFire Rated, Smoke Rated, UL Classified, Air Infiltration Rated
-
Warranty3 Year Limited Warranty
-