Pemko #18041 Door Sweep, .75" Clear Aluminum Casing with .375" Nylon Brush, 84" Length. QUICK SHIP
This Door Sweep is applied to the face of doors to seal the gap between the door and floor surface. Casing measures .75" H, while brush portion has a height of .375". The Pemko 18041 comes with a Nylon Brush. This door sweep is Clear Anodized aluminum and is 84" long.
PRICED PER Piece - QUICK SHIP See product specs and details in the tabs below
For additional finishes and sizes, see our Pemko 18041CNB Brush Door Sweep.
This Door Sweep is applied to the face of doors to seal the gap between the door and floor surface. Casing measures .75" H, while brush portion has a height of .375". The Pemko 18041 comes with a Nylon Brush.
Installation: Installation instructions and screws provided. Screws are colored to coordinate with casing.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For a larger seal, see our Door Bottom sweep, .75" Casing, .5" Nylon Brush.
-
QuickShipYes
-
ManufacturerPemko Manufacturing
-
MPN18041NB
- About this Product
-
Door Shoe Retainer MaterialAluminum
-
Temperature Range-40° F to +400° F
-
Door TypeWooden Door, Metal Door
-
Seal TypeNylon Brush Seal
-
MountingSurface Mounted
-
- Dimensions
-
Seal Height3/8" Height
-
Total Height1-1/8" Height
-
Additional DimensionsDoor seal is 1/4" thick
-
Length84" Length
-
- Installation
-
Drill HolesDrill holes are provided
-
- Finishes
-
FinishClear Aluminum Anodized (US28)
-
- Compliance Details
-
Compliance DetailsFire Rated, Smoke Rated, BHMA Certified, UL Classified
-
ANSI DesignationR3A134
-
Warranty5 Year Limited Warranty
-