Pemko #357 Meeting Stile, 2" Aluminum or Steel Overlapping Strip, .125" Thick
This Overlapping Astragal is surface applied to the face of a door to cover the gap between two doors. The metal strip is 2" x .125" and is designed for Single Active Doors in a Double Door Set. Available in anodized aluminum, steel prime or stainless steel, with or without drilling, and is custom cut to size.
PRICED PER RANGE
This high quality, Overlapping Astragal is surface applied to the face of the door to seal the gap between a pair of double doors and prevent infiltration of dust, drafts, light, smoke, fire and moisture.
Design: Overlapping Astragal is applied to the face of the active door and sits over the gap to rest on the inactive door. The astragal will not impede on proper operation of door.
Dimensions: Strip has a width of 2" with a thickness of .125" to prevent warping and bending, even through extended use. This astragal is designed for high frequency usage and will continuously ensure superior performance.
Installation Guide and screws provided. Standard supplied fastener is #10 x 1" Truss Head SMS. Can also be installed with 1⁄4"- 20 Thru-Bolts, which can be purchased through our office by contacting us or calling at 845-388-1300.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click to view our Full Warranty Policy.
To view this product with higher ratings, see our 2" Meeting Stile System with Silicone Weatherstrip.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN357
-
DrillingDrilling Required, Drilling Not Required
- About This Product
-
Retainer MaterialAluminum, Steel
-
Door TypeSingle active door in a double door set
-
MountingSurface Mounted
-
- Dimensions
-
Total Height2"
-
Width1/8"
-
- Installation
-
Installation Screws#10 x 1" Truss Head SMS Provided
-
- Finishes
-
FinishClear Anodized Aluminum (US28), Dark Bronze Anodized Aluminum (313), Gray Primed Galvanized Steel, Satin Stainless Steel (US32D)
-
- Compliance Details
-
Compliance DetailsFire Rated, UL Classified
-
Warranty5 Year Limited Warranty
-
Click to View Ratings Explained
Finishes Comply with the Following ANSI / BHMA Codes:
- Clear Anodized Aluminum - US28 / 628
- Dark Bronze Anodized Aluminum - US10B / 710
- Gold Anodized Aluminum - US4 / 688
- Stainless Steel (Polished) - US32D / 630