Adams Rite 4560-11 Deadlatch Handle, For Unlocking MS+1890 Deadlock/Deadlatch, For Aluminum and Hollow Metal Doors

Adams Rite offers a range of trims designed to easily integrate with our deadlocks and deadlatches to compliment any door. This deadlock handle is a door trim that easily unlocks the MS+1890 Deadlock/Deadlatch in aluminum and hollow metal applications.

Handle: ADA compliant lever is shaped to fit the hand, with a concave thumbrest portion that tends to keep knuckles and thumb safely away from the jamb, even on a short backset narrow stile. 

Escutcheon: A 1/4" square heat-treated spindle is part of the escutcheon assembly, which interlocks with the cam plug. Finished to match lever. Handle uses the same sloping 1-3/8" x 4" escutcheon, designed to match the clean lines of a narrow stile door.

Cam Plug: Secured in latch body by cylinder set screw, the plug is also rigidly tied to handle escutcheon by hardened steel pins. Handing can be reversed by removing a spring clip, reversing the cam, and replacing the clip.  

Compatibility: MS+1890 Deadlock/Deadlatch

For a handle compatible with 4300 Electrified Deadlatch, 4510, 4530, 4900 and 4920AN Deadlatches, see our 4560-01 Deadlatch Handle.

Installation: The handles fit solidly into the cylinder hole of Adams Rite deadlatches. For more details on how to install this door trim, see our Installation Instructions.

Operation: Designed to operate deadlatch by a natural downward hand movement. Not intended for use as a door pull.

Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See Product Specs for exact measurements.

This product has a 10 year warranty against defects in materials and workmanship.
 Click here to view our Full Warranty Policy.

Click here to view our Adams Rite 4550 MS® Deadlock Lever, For Unlocking MS® Deadlocks.