NGP 411 Utility Threshold, 3" Aluminum or Brass with Smooth Top, .25" Height
NGP 411 Utility Threshold has a width of 3" with a smooth top surface. It has a clearance of .25" which creates a barrier against dirt, dust, drafts and light infiltration. This threshold is wheelchair accessible. Available in two aluminum finishes or brass and length is custom cut to size.
PRICED PER FOOT - See full product details and specs in the tabs below
NGP 411 Utility Threshold Key Features:
Recommended to provide the best results where automatic door bottoms are used
Material: Alloy CDA 385 (Copper Alloy No. C38500), Aluminum alloy 6063, T5 temper
Width: 3"
Height: .25" (1/4")
Length: Custom cut to size.
Weight: .50 lbs/ft. for Aluminum and 1.42 lbs/ft. for Brass
Typical Wall Thickness: .125" for Aluminum and .130" for Brass
Finishes: Mill Finish Aluminum, Dark Bronze Anodized Aluminum, Satin Finish Bronze
Compliance Details: ADA Compliant, UL Listed, ANSI/BHMA Certified, Positive Pressure Certified.
Installation: See Installation Guide tab.
- If threshold is being drilled into concrete, an Expansion Anchor is recommended.
- #10 x 1-1/2" FH zinc plated or brass plated wood screws included.
Drilling: Threshold is drilled along the center line in standard factory locations.
Options (Can be purchased through our office at 845-388-1300): Available with Slip-Resistant Finish
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For additional thresholds, see our NGP 412 Utility Threshold 4" Aluminum or Stainless Steel with Smooth Top, .5" Height.
-
QuickShipNo
-
ManufacturerNational Guard Products
-
MPN411
- Dimensions
-
Overall Height.25" Height
-
Overall Width3" Width
-
Threshold LengthCustom Cut to Size
-
Required Door Clearance.375" Height
-
Thickness.125" Thick, .130" Thick
-
- Product Design
-
Flat Saddle DesignSmooth Top Design
-
Threshold TypeFlat Utility Threshold
-
MaterialAluminum, Brass
-
- Installation
-
Drilling HolesDrilling holes provided
-
FastenersFasteners Provided
-
- Finishes
-
FinishMill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313), Bronze Mill Finish (Brass)
-
- Compliance Details
-
Warranty3 Year Limited Warranty
-