NGP 5025 Self-Adhesive Weatherstrip, .5" Wide Double TPE Batwing Seal
This item has been discontinued For similar item see the NGP 5020
NGP 5025 Adhesive Weatherstrip, Batwing TPE Seal Seal Key Features:
Width: .5" (1/2")
Height: .5" (1/2")
Length: See sizing options. Coils can be easily sized with a household scissor, as needed.
Seal Material: TPE material is resistant to aging, weathering, UV radiation, water, detergent, alcohol and the influence of chemicals.
Double Batwing Design: The double batwing design has superior sealing characteristics against smoke, air, and sound. Batwing design ensures a low closing force it begins compressing at 5/16" up to 1/16" gap.
Compliance Details: REACH and RoHS compliant, Smoke and draft control; UL Listed; ANSI/BHMA Certified; Positive Pressure Tested; Air Infiltration Rated; Anti-Microbial (Clear seals are not anti-microbial).
Temperature Range:Â
- -60°F to 275°F
- End use temperature range of adhesive, long term exposure -30°F up to 250°F
Installation:
- This gasket has a self-adhesive backing, for easy installation.
- Modified acrylic pressure sensitive adhesive protected by release liner
- Provides high initial adhesion and long term holding power for permanent mounting in exterior or interior locations
- Shelf life of adhesive prior to installation is one year when stored at 75°F and 50% relative humidity or less
- See Installation Guide tab for more info.Â
This gasket has a limited shelf-life. Product must be used within 1 year of purchase.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3Â year guarantee against defects in material and workmanship.
 Click here to view our Full Warranty Policy.
For additional weatherstripping, see our NGP 5021 Kerf Weatherstrip, .5" Wide TPE Batwing Seal