NGP 5060 Self-Adhesive Weatherstrip, .5" Wide Silicone Single Angle 'T' Fin Seal

NGP 5060 Adhesive Weatherstrip Silicone Single 'T' Fin Seal can be installed onto the perimeter of a door frame to slow / prohibit the passage of smoke, fire, weather, sound and dirt. It is easily installed with a self-adhesive backing. Available in 3 colors and in various sized coils.

Priced per coil  - See full product details and specs in the tabs below.

See tabs below for additional information
    • SKU
      NG5060CL17
    • Market price:$61.20
      • save 15%
    • Starting price: Price: $52.02 per item
     

    NGP 5060 Adhesive Weatherstrip, Silicone Single Angle 'T' Fin Seal Key Features:

    Width: .5" (1/2")

    Height: .3125" (5/16")

    Length: See sizing options. Coils can be easily sized with a household scissor, as needed.

    Seal Material: Silicone material is resistant to aging, weathering, UV radiation, water, detergent, alcohol and the influence of chemicals.

    Fin Design: The fin design ensures a low closing force it begins compressing at 5/16" up to 1/16" gap.

    Compliance Details: Smoke and draft control - category “H”, up to 3 hours hollow metal fire doors, up to 90 minutes wood fire doors; UL Listed; ANSI/BHMA Certified, Accoustical Tested; Positive Pressure Tested; Air Infiltration Rated.

    Temperature Range:

    • -100°F to 500°F, remains flexible at extreme temperatures
    • End use temperature range of adhesive, long term exposure -30°F up to 250°F

    Installation:

    • This gasket has a self-adhesive backing, for easy installation.
    • Recommended for areas using FM200 or Halon Fire Suppression Systems
    • Modified acrylic pressure sensitive adhesive protected by release liner
    • Provides high initial adhesion and long term holding power for permanent mounting in exterior or interior locations
    • Shelf life of adhesive prior to installation is one year when stored at 75°F and 50% relative humidity or less
    • See Installation Guide tab for more info. 

    This gasket has a limited shelf-life. Product must be used within 1 year of purchase.

    Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

    This product has a 3 year guarantee against defects in material and workmanship.
    Click here to view our Full Warranty Policy.

    For smaller gap weatherstripping, see our NGP 5050 Adhesive Weatherstrip, .5" Wide Anti-Ligature Silicone Bulb

      • SKU
        NG5060CL17
    • QuickShip
      No
    • Manufacturer
      National Guard Products
    • MPN
      5060
    • Length
      17', 21'
    • Finishes
      • Finish
        Clear, Charcoal


    SHIPPING / PROCESSING TIME:

    This product ships directly from the manufacturer. 
    Please allow 2 - 3 weeks to ship

    Exception: Bronze Anodized products require 4 - 5 weeks to ship
    • Domestic Shipping Fees- (Hawaii and Alaska not Included):
      • FREE SHIPPING on orders over $300.00 (excludes oversized and freight orders). 
      • There will be a flat $19.99 shipping and handling fee on orders under $300.00.
      • Oversize: Orders containing items sized 50" - 95" have an oversize surcharge of $49.99.
      • Freight Items: Orders containing items sized 96" - 108" have an oversize surcharge of $199.99.
      • Oversize Freight Items: Orders containing items sized 109" and above have an oversize surcharge of $299.99.
      • Orders totals above $2,000.00 will ship free, regardless of size.
         
    • Alaska and Hawaii, Canada, and International Shipping:
    • Returns:
      • This product is custom made and is not returnable.
      • We are committed to your satisfaction, as a courtesy, we may, at our discretion accept returns with a minimum 30% restock fee.
      • CLAIMS FOR SHORTAGE OR DAMAGE IN TRANSIT: All claims must be made within Seven (7) days of receipt of goods.
      • Weatherstripping products will not be considered for returns.
      • Item must be in new, resalable condition.
      • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
      • Return shipping is customer's responsibility. A return address will be provided with RMA#.
      • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.