NGP 8428 Utility Threshold, 8.125" Aluminum or Brass with Thermal Break, .5" Height
NGP 8428 Utility Threshold has a thermal break in the center of the threshold which inhibits the passage of heat or cold through the metal. It has a width of 8.125" and a clearance of .5" which creates a barrier against dirt, dust, drafts and light infiltration. This threshold is wheelchair accessible. Available in two aluminum or brass finishes and length is custom cut to size.
PRICED PER FOOT - See full product details and specs in the tabs below
NGP 8428 Utility Threshold with Thermal Break Key Features:
Material: Aluminum alloy 6063, T5 temper; Alloy CDA 385 (Copper Alloy No. C38500)
Width: 8.125" (8-1/8")
Height: .5" (1/2")
Length: Custom cut to size.
Weight: 1.30 lbs/ft. for Aluminum, 3.62 lbs./ft. for Brass
Typical Wall Thickness: .110"
Finishes: Mill Finish Aluminum, Dark Bronze Anodized Aluminum, Satin Finish Bronze
Compliance Details: ADA Compliant.
Installation: See Installation Guide tab.
- If threshold is being drilled into concrete, an Expansion Anchor is recommended.
- #10 x 1-1/2" FH zinc plated/brass wood screws included. Dark Bronze supplied with DKB thresholds.
Drilling: Threshold is drilled along the center line in standard factory locations.
Options (Can be purchased through our office at 845-388-1300):
- Slip-Resistant Finish
- Polished (721) Finish for Brass threshold
- Dark Oxidized Oil Rubbed (722) Finish for Brass threshold
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For additional thermal break thresholds, see our NGP 8429 Utility Threshold 9.125" Aluminum or Brass with Thermal Break, .5" Height.
-
QuickShipNo
-
ManufacturerNational Guard Products
-
MPN8428
- Dimensions
-
Overall Height.5" Height
-
Overall Width8.125" Width
-
Threshold LengthCustom Cut to Size
-
Required Door Clearance.625" Height
-
Thickness.110" Thick
-
- Product Design
-
Flat Saddle DesignFluted (Grooved) Design
-
Threshold TypeFlat Utility Threshold
-
MaterialAluminum, Brass
-
- Installation
-
Drilling HolesDrilling holes provided
-
FastenersFasteners Provided
-
- Finishes
-
FinishMill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313), Bronze Mill Finish (Brass)
-
- Compliance Details
-
Warranty3 Year Limited Warranty
-